• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired X'mas and New Year Surprise

NetKidz

Enlightened
Joined
Jun 21, 2006
Messages
569
Location
Taiwan
Feb 8 Updated: Still busy on company work. I'm still slow in response of mail/PM. But I usually ship your order in 2 days when I get PP notice mail. BTW, Feb 12~21 will be long Chinese New Year holidays and the Post Office will be closed. I'll stop shipping at that period. Thanks.


Thanks for your support in the past year and early celebration of X'mas and New Year. :santa:

From now on, for any quantity and/or combination of the following custom items:
FS: custom made forward-clicky switch for SF P/G/C/Z tailcap
FS: empty LED tower for Surefire M3T/M4/M6/KT1/KT2/KT4 head(accept 17mm driver)
FS: Black CR2 body for Aleph and SureFire E-series (two types)

Add additional US$10 per each order, you will get one set of Type A and B of Black CR2 body for Aleph and SureFire E-series (Limited to 30 sets, no additional S/H)

If you have any question, just let me know.
Thanks. ;)


(14 sets available, as of post #16, 2010-01-31)
===========
monanza, 1 set, Shipped on 12/21
Justin Case, 1 set, Shipped on 12/21
donn_, 1 set, Shipped on 12/21
csadzuki, 1 set, Shipped on 12/21
via PM, 1 set, Shipped on 12/21
RocketTomato, 1 set, Shipped on 12/21
leukos, 1 set, Shipped on 12/21
datiLED, 1 set, Shipped on 12/22
Dog Chaser, 1 set, Shipped on 12/21
Jumi, 1 set, Shipped on 12/22
william lafferty, 1 set, Shipped on 12/22
Burman, 1 set, Shipped on 1/4
rje58, 1 set, Shipped on 1/4
jwyj, 1 set, Shipped on 1/4
criollo, 1 set, Shipped on 1/7
csadzuki, 1 set, Shipped on 1/19
 
Last edited:
Awesome. Thanks. Just ordered an empty tower; I could not pass this up! Both the tower and bodies were on my list but funds are stretched. This made it possible (well, at least palatable).:D

:party:
 
Thanks for the great offer! :thumbsup:

I've signed up for a complete tower module but I just couldn't resist to this generous offer and ordered an empty tower! :popcorn:
 
Thanks, Netkidz

Your products are always top notch, but this offer just puts it over the top! I ordered in your clickie thread. Thanks!
 
Can you give me some info,I have a nitecore extream surefire e compatable I am told,Can I use a cr2 battery and a tailcap with the head?Can you either Pm me or post here what options I have.Im not clear on your post.

Thanks,
Paul
 
Order placed for one more clicky.

Your service has always been :twothumbs
Thanks
Juha
 
Thanks a lot for your support. lovecpf


-----------
monanza,
donn_,
csadzuki,
leukos,

Shipped on 12/21

----------
datiLED,

Will ship your after I have your address.

---------
Jumi,
william lafferty,

Will ship your tomorrow morning.

Thanks again.
 
Hi Paul,

Can you give me some info,I have a nitecore extream surefire e compatable I am told,Can I use a cr2 battery and a tailcap with the head?Can you either Pm me or post here what options I have.Im not clear on your post.

Thanks,
Paul

I didn't have Nitecore Extreme at hand to test. As I know e3 head is e-series compatible, the head should be usable with my CR2 body. Not sure about the Nitecore tailcap.

Thanks.
 
datiLED,
Jumi,
william lafferty,

Sorry for the late update. Your items were shipped on 12/22 morning. I've sent the tracking number to your PP e-mail address, if you didn't get it please let me know.

Thanks again. :)
 
My bodies arrived today. Thanks.

They are so small, Mule head, CR2 body and SF clicky, total 73mm, 68mm with non lockout twisty.:clap:

A-type body went to E1B head with LifePO4.

Now I need more black heads:shakehead

Juha
 
:paypal: sent for one CR2 body, type B, and one additional CR 2 body set.

Thank you and Happy New Year!
 
Top