* P60 Flashlight List {host}

kosPap · Oct 15, 2009

BTW new vesrion of an older host
SmallSun ZY-C73 Cree Q3-WC 3-Mode 150-Lumen LED Flashlight with Assault Crown -
DX 24354

UltraFire 504B HA-III Cree R2-WC 5-Mode 220-Lumen LED Flashlight DX 24200 & 24201

orbital · Oct 15, 2009

kosPap said:
BTW new vesrion of an older host
SmallSun ZY-C73 Cree Q3-WC 3-Mode 150-Lumen LED Flashlight with Assault Crown -
DX 24354

UltraFire 504B HA-III Cree R2-WC 5-Mode 220-Lumen LED Flashlight DX 24200 & 24201

+

got it,

thanks..:D

Flash_25296 · Oct 15, 2009

kosPap said:
BTW new vesrion of an older host
UltraFire 504B HA-III Cree R2-WC 5-Mode 220-Lumen LED Flashlight DX 24200 & 24201

I think this might only be HA-II or something similar but not HA-III!

kosPap · Oct 16, 2009

of course...I only copy pasted the DX title...

at the price and the way it shines I would not be shocked if it was only spray painted....

kosPap · Nov 5, 2009

wow! that is a killer.....

i would like to know if the tailcap is copatible with the CL1H

PlayboyJoeShmoe · Nov 5, 2009

Good looking light but it looks too long for tail switch.

qtaco · Nov 7, 2009

Anyone care to speculate on what the performance would be like on the Javelin? I would love to own a 2xAA P60 light, but not if the performance was worse then a dedicated 2xAA light (LD20, D20 etc). Would it be difficult to find P60 drop-ins that would work well with 2xAA?

Black Rose · Nov 7, 2009

qtaco said:
Anyone care to speculate on what the performance would be like on the Javelin? I would love to own a 2xAA P60 light, but not if the performance was worse then a dedicated 2xAA light (LD20, D20 etc). Would it be difficult to find P60 drop-ins that would work well with 2xAA?

The only data I have seen for drop-ins that will work with 2xAA are from Solarforce.
I believe it was reported to have about 1 hours runtime on high.

Solarforce and Dereelight both have P60 drop-ins that will work with 2xAA.

Flash_25296 · Nov 8, 2009

I just received the Ultrafire 504B in the mail Friday and here is my initial impression:

The flashlight is heavier then I expected, the battery tube and head are made of thicker metal. There is good heat sinking enough to for an MC-E P60 drop-in on high. The threads are larger than on my Deree CL1H and are smooth. The battery can be taken out through the tail cap area or the head side when removing the Pill. My AW protected 18650's fit with very little rattle within the diameter of the tube. The tail switch is a reverse clicky and mine tail stands nicely with no obstructions from the switch. The switch moves without too much force and feels comfortable. The finish on mine is very good with no noticeable blemishes.

The lens on mine came very dirty and hazy, it took awhile to clean it but it is fine. This light might benefit from a better lens. The O-rings on the head and tail cap are not tall enough, they need to be about .5-1 mm taller to create some resistance and provide better water protection.

All in all a good host for a P60!

Nite · Nov 9, 2009

Black Rose said:
The only data I have seen for drop-ins that will work with 2xAA are from Solarforce.
I believe it was reported to have about 1 hours runtime on high.

Solarforce and Dereelight both have P60 drop-ins that will work with 2xAA.

those would work great with an FM AA body. Im going to order one, MY GF doesnt like Lion 3.7 cells...she likes alkaline nimh etc...

old4570 · Nov 12, 2009

http://www.kaidomain.com/ProductDetails.aspx?ProductId=8434

On the list ...

Sorry , was just wondering ? I like the look / style , and was thinking of buying it . Anyone have any feedback on this one ?

FlashCrazy · Nov 13, 2009

qtaco said:
Anyone care to speculate on what the performance would be like on the Javelin? I would love to own a 2xAA P60 light, but not if the performance was worse then a dedicated 2xAA light (LD20, D20 etc). Would it be difficult to find P60 drop-ins that would work well with 2xAA?

With 2 x AA and the stock OP reflector, I'm measuring about 7,000 to 7,800 lux on my meter. For reference, the EagleTac P20A2 with the SMOOTH reflector (I think it was the brightest 2 x AA light to date) measures about 6,200 lux on the same meter. With the smooth reflector installed in the Javelin, I'm getting about 9,000 to 9,500 lux! The addition of the ext tube (3 x AA with SMO refl.) resulted in 10,500 to 11,000 lux! :D

qtaco · Nov 13, 2009

Thanks for the information, that's very impressive!

kramer5150 · Nov 13, 2009

Is this light a P60 host?
http://kaidomain.com/ProductDetails.aspx?ProductId=9008

:thinking:

kosPap · Nov 14, 2009

AardvarkSagus said:
Does anyone know whether or not the "Police" branded light at Lighthound is P60 compatible?

http://www.lighthound.com/Police-Chinese-Flashlight-Black-ON-SALE_p_6-1548.html

well it is!

did it last night..a P60 module will thread im the place of the Xenon bulb assembly, but it has to either have the right geometry of some material removed form the pill...(see elsewhere on this thread)

The problem is that a P60 wont fit....but a cree optic (23mm) (from DX or KD) will easily go in the head if you remove the reflector..so you screw in the pill, place the optic in the LED and top-off with the bezel....

Presto...damn I was lazy last night and got no measurments or pics..maybe next week.

Edit 21/11

here is a pic of the mod....

CAUTIOn....the brass pill dimensions are critical..By this I mean how high it will sit on the body. Other wise thre will be some dead space....in that case I suggest using a 1,5mm+ O-ring between the optic and Lens

DaveTheDude · Dec 2, 2009

I can confirm that the Cabela's CR123 powered 6V and 9V lights will accept Gene Malkoff's P60 drop-ins. The Malkoff drop-ins fit my lights perfectly; they don't rattle; and the upgraded output amazes those whose life experience does not yet include exposure to real lighting tools.

PlayboyJoeShmoe · Dec 2, 2009

If you are a bit creative the Streamlight Twin Task 1L and 2L can be P60 hosts.

Takes drilling and tapping tail for Kroll and gutting the lights. They weren't worth much as stock anyhow.

orbital · Dec 2, 2009

DaveTheDude said:
I can confirm that the Cabela's CR123 powered 6V and 9V lights will accept Gene Malkoff's P60 drop-ins. The Malkoff drop-ins fit my lights perfectly; they don't rattle; and the upgraded output amazes those whose life experience does not yet include exposure to real lighting tools.

+

Dave, what specific Cabela's model,..is it the XPG N-series?

LG&M · Dec 15, 2009

Does anyone know it the T.O.P Stryker http://newgraham.com/store/product/1900/TOP-Stryker-Xenon-Flashlight-TOPLX6AK2B/
Will work. Also how is the quality?

kosPap · Dec 16, 2009

LG&M

make an advanced search for it....and in youtube too..

the Stryker has a narrower drop-in socket....so either you will have to thindown the drop-in (reflector) or open-up the flashlight socket...

* P60 Flashlight List {host}

Help Support Candle Power:

Flashlight Enthusiast

Flashlight Enthusiast

Newly Enlightened

Flashlight Enthusiast

Flashlight Enthusiast

Flashaholic

Newly Enlightened

Flashlight Enthusiast

Newly Enlightened

Enlightened

Flashlight Enthusiast

Flashlight Enthusiast

Newly Enlightened

Flashaholic

Flashlight Enthusiast

Flashlight Enthusiast

Flashaholic

Flashlight Enthusiast

Enlightened

Flashlight Enthusiast