CQB
Enlightened
(deleted post - I reposted under Incan Section)
Last edited:
lumens factory question
- Thread starter CQB
- Start date
Help Support Candle Power Flashlight Forum
- Status
Hi CQB,
Like the name btw, very catchy and it's something everyone should learn a little bit of.
Going back to your post...
LF bulbs are measured by the factory in bulb lumens, so your EO-4 is putting out approximately 123.5 torch lumens. Multiply your bulb lumens by .65 (65%) and you can get a rough conversion from bulb to torch lumens. Pretty cool, huh?
...but you also mentioned using a Pila 3.7V for the 6P. The battery yields 3.7V versus the standard 6V, so it will be less intense (using any bulb). Hope this helps!
Dudemar
Like the name btw, very catchy and it's something everyone should learn a little bit of.
Going back to your post...LF bulbs are measured by the factory in bulb lumens, so your EO-4 is putting out approximately 123.5 torch lumens. Multiply your bulb lumens by .65 (65%) and you can get a rough conversion from bulb to torch lumens. Pretty cool, huh?
...but you also mentioned using a Pila 3.7V for the 6P. The battery yields 3.7V versus the standard 6V, so it will be less intense (using any bulb). Hope this helps!
Dudemar
CQB
Enlightened
hey Dudemar, thanks for the reply. I reposted my question under Incan section cuz i thought this one was the wrong one to post in in the first place. Sorry Moderators!
and thanks re: my handle. yeah CQB is something everyone should learn about. Like alot of things i guess.
take care & be safe.
CQB
and thanks re: my handle. yeah CQB is something everyone should learn about. Like alot of things i guess.
take care & be safe.
CQB
- Status
