2 x LiIon and this M*g light kit?

harddrive · May 11, 2008

I am interested in ordering this drop-in and lens kit:

http://www.kaidomain.com/WEBUI/ProductDetail.aspx?TranID=4465

What is the maximum voltage I could use without damaging the circuit? I want to use 2 x 3.7 LiIon if possible.

Description states:

"Features an evolutional 2.0~4.5V Boost-Buck Current Regulated Circuit"

Does that mean it can only handle 4.5V MAX? Or will it just run direct drive above 4.5V?

Thanks

David Gretzmier · May 11, 2008

If your hung on Lithium Ion, You could use one and then a dummy cell or two. It looks like 2 will be too much. if it goes direct drive above the board on 2, 7.4-8.4 will be too much for the led. You'd probably get better run time out of 3 nimh ( 3x d size=12-15000 mah at 3.6 volts) than 0ne lithium ( 7500mah d size ) and a dummy cell. you also might check your other options, there are alot of mag drop ins that are much brighter for that wow affect. good luck !

2 x LiIon and this M*g light kit?

harddrive

Enlightened

David Gretzmier

Newly Enlightened

Similar threads

Latest posts