Dec 4, 2009 #1 F fannin Enlightened Joined Sep 3, 2009 Messages 201 Location u.k. i just bought an ld20 an the threads seem dry, the o=rings look lubed do i need to lube the threads?
Dec 4, 2009 #2 jhc37013 Flashlight Enthusiast CPF Supporter Joined Feb 17, 2009 Messages 3,268 Location Tennessee Yes if the threads are dry lube them. Just clean everything with some alcohol and lube. https://www.candlepowerforums.com/threads/242414
Yes if the threads are dry lube them. Just clean everything with some alcohol and lube. https://www.candlepowerforums.com/threads/242414
Dec 4, 2009 #3 F fannin Enlightened Joined Sep 3, 2009 Messages 201 Location u.k. and if so could i use 3 in 1 oil? it's all i've got to hand
Dec 4, 2009 #5 pobox1475 Enlightened Joined Apr 25, 2008 Messages 838 Location High Desert, CA could i use 3 in 1 oil? it's all i've got to hand Click to expand... I would not. Way too thin and will attract dirt readily. Try to get some good lube. I like Nyogel 760G.
could i use 3 in 1 oil? it's all i've got to hand Click to expand... I would not. Way too thin and will attract dirt readily. Try to get some good lube. I like Nyogel 760G.
Dec 4, 2009 #7 DM51 Flashaholic Joined Oct 31, 2006 Messages 13,338 Location Borg cube #51 The topic is discussed fully in the thread linked by jhc37013 in post #2 above. Please continue there, and I'll close this one.
The topic is discussed fully in the thread linked by jhc37013 in post #2 above. Please continue there, and I'll close this one.