Epoxy Optics to LS??
- Thread starter ResQTech
- Start date
Help Support Candle Power Flashlight Forum
Rothrandir
Flashaholic
i did it here, but the beam was sort of funkey.
the best way to do it is to use an ls/o, or use a copper pipe of appropriate diameter. the reason i did not do it in this case, was because i wanted to use a reflector in conjunction with the optic.
the best way to do it is to use an ls/o, or use a copper pipe of appropriate diameter. the reason i did not do it in this case, was because i wanted to use a reflector in conjunction with the optic.
The best way to fixate an NX05 is either with the star-optics setup itself, or a holder of some sort, to keep the NX05 secure... You don't really want to epoxy the collimator directly to the LS itself, nor do you want to epoxy it to the lens or the sides of the flaslight body, per se, unless you feel comfortable with the connection strength of the soldered wires and with that light staying in that configuration for a long time...
Latest posts
-
More EV fires after salt water flooding
- Latest: cedricwilsom1990
-
-
-
-
-
-
-
