Sold/Expired Last Price Drop - FS Multifunction LED Surefire M6 Kit 500.00

Up for sale is my mint LED Surefire M6.
Never carried just turned on occasionally.
A. Tower Module II made by Katokichi, noted flashlight modder from Japan
This LED module is multifunction, including 3 light levels, and 8
more, blink, fast blink, marker, strobe, wave, hi/low, heartbeat, and SOS.
selected by push button or twist switch.
Very few of these tower modules were produced I believe only 16. For info check this link.
http://candlepowerforums.com/vb/showpost.php?p=1719301&postcount=1
B. Blackhawk nylon belt holster.
C. Included are 3, MN15, HOLA, and purple base incandescent light bulbs.
D. Rechargable battery holder made by mdocod, will hold 2 18650 batteries, batteries not included.

Altogether a very nice complete lighting package. HRes pic links below.

575.00 550.00 500.00 shipped and insured CONUS, Pay Pal, or CC Pay Pal.
Shipped US Priority Mail.
First I'll Take It Rules apply.
Thanks

HRes Pic 1
HRes Pic 2
HRes Pic 3

Re: FS Multifunction LED Surefire M6 Kit

That's a M6 Magnumlight too, nice! :thumbsup: Good luck with the sale!

Re: FS Multifunction LED Surefire M6 Kit

if you should decide in favor of a split sale, I then take the Katokichi Tower module!

Re: FS Multifunction LED Surefire M6 Kit

if you should decide in favor of a split sale, I then take the Blackhawk nylon belt holster.

Re: FS Multifunction LED Surefire M6 Kit

if you should decide in favor of a split sale, I will take the turbohead, M6 body and TC as well as the mdocod 2 x 18650 carrier!

shipping to Michigan!

Re: FS Multifunction LED Surefire M6 Kit

Thanks for all of the fine offers, but if it does not sell,
I would rather keep it with all the goodies.
:thanks:

Re: FS Multifunction LED Surefire M6 Kit

what kind of output does that LED tower have?

and what is that purple base incan lamp assembly? does that allow you to install bipin incan bulbs?

Re: FS Multifunction LED Surefire M6 Kit

Purple is probably an older version of the MN20.

See this post for drive currents, which you can use to estimate emitter lumens. The trick is whether the LED is a Seoul P4 (and which flux bin) or a Lux V XX1T bin. Also note that claimed driver input voltage is 7.4v min to 13 volts max.

Re: FS Multifunction LED Surefire M6 Kit

pOkiE said:

what kind of output does that LED tower have?

and what is that purple base incan lamp assembly? does that allow you to install bipin incan bulbs?

Click to expand...

Not sure of the output of tower, but the attached link should answer most questions.
Wasn't sure what the purple base light was, no markings, but is probably an older MN20 as stated by another user.
Thanks for asking.
Tim

Re: FS Multifunction LED Surefire M6 Kit Price Drop

Week End Price Drop
:mecry: