litho123
Enlightened
These lights use top notch components provided by Fivemega, modamag, Kiu, Andrewwynn (AWR), Litho123. All you need to do is add batteries and a Borofloat lens to complete the light. These parts are never used, left over from a previous Custom Sales Build.
=== Tri-Bored 2D M@g's (by Fivemega) ===
These standard 2D bodies have been tri-bored inside … that's 3 grooves bored to accept 3 Pilas/17mm Li-Ion cells across using Fivemega's (FM) 3xPila holders. It also leaves enough room to use nimh batts 4-across with Modamag's (MM) holders.
Purple - Available
Black … Available
=== Andrewwynn's LDO Hotdrivers ===
Take the Magswitch, add Kiu's modified Hi-Temp Bi-Pin socket and incorporate awr's miniature LDO Hotdriver circuitry. Viola! You now have a light that has soft start, voltage regulation, auto shutoff, can be used Hot off the charger and, by adding an extra cell, the hotdriver will deliver constant light output for virtually the entire run before needing a recharging. These are not designed for use over 5 amps. HotDriver preset at 8.3v and designed to properly operate with 8AA nimh batteries.
=== Fully Assembled Battery Holder (by modamag) ===
MM 8AA-2D / Series / 9.6V ...
=== Bulbs ===
(3) 1274 bulbs … WA01274: 7.2v 2.77a @ spec (553 b-lumens) / 8.4v (948 b-lumens)
=== Camless Reflectors ===
These reflectors have the small .377" bulb opening to maximize the output from your flashlight. Your Choice
#1 – Smooth, Mirror Finish ...
#4 – Heavy Orange Peel …
#6 – Medium Stipple …
#7 – Heavy Stipple …
Special Package Price of $150.00 each
=== Shipping Delivery ===
Priority Shipping in the USA with Delivery Confirmation - Free
International shipping via Regular Air – Please ADD $10.00
std disclaimer: not responsible for lost shipments.
=== Payment Information ===
Post your order here for tracking purposes
Paypal to gregholzataoldotcom
Please Note: CPF handle your order list
For non-paypal payments, please post what you want and then email me at the same for a mailing address.
Questions welcome.
=== Tri-Bored 2D M@g's (by Fivemega) ===
These standard 2D bodies have been tri-bored inside … that's 3 grooves bored to accept 3 Pilas/17mm Li-Ion cells across using Fivemega's (FM) 3xPila holders. It also leaves enough room to use nimh batts 4-across with Modamag's (MM) holders.
Purple - Available
Black … Available
=== Andrewwynn's LDO Hotdrivers ===
Take the Magswitch, add Kiu's modified Hi-Temp Bi-Pin socket and incorporate awr's miniature LDO Hotdriver circuitry. Viola! You now have a light that has soft start, voltage regulation, auto shutoff, can be used Hot off the charger and, by adding an extra cell, the hotdriver will deliver constant light output for virtually the entire run before needing a recharging. These are not designed for use over 5 amps. HotDriver preset at 8.3v and designed to properly operate with 8AA nimh batteries.
=== Fully Assembled Battery Holder (by modamag) ===
MM 8AA-2D / Series / 9.6V ...
=== Bulbs ===
(3) 1274 bulbs … WA01274: 7.2v 2.77a @ spec (553 b-lumens) / 8.4v (948 b-lumens)
=== Camless Reflectors ===
These reflectors have the small .377" bulb opening to maximize the output from your flashlight. Your Choice
#1 – Smooth, Mirror Finish ...
#4 – Heavy Orange Peel …
#6 – Medium Stipple …
#7 – Heavy Stipple …
Special Package Price of $150.00 each
=== Shipping Delivery ===
Priority Shipping in the USA with Delivery Confirmation - Free
International shipping via Regular Air – Please ADD $10.00
std disclaimer: not responsible for lost shipments.
=== Payment Information ===
Post your order here for tracking purposes
Paypal to gregholzataoldotcom
Please Note: CPF handle your order list
For non-paypal payments, please post what you want and then email me at the same for a mailing address.
Questions welcome.
