Single 17500/18500 light

ScaryFatKidGT · Mar 7, 2012

So 2 things I have thought of.

#1 Will a RRT-O/V10R or other AA/CR123 light, with the AA extender in place take a 17500?

#2 Sense the Jetbeam BC10 and BA10 are the same diameter and the PA10 is actually wider than the PC10 could the BA/PA10 be bored to fit a 17500 or 18500? These light are quite amazing on 14500/16340's but don't have much run time but a light run on single 17500 would be small and would start to have pretty decent run times.

archimedes · Mar 7, 2012

ScaryFatKidGT said:
So 2 things I have thought of.

#1 Will a RRT-O/V10R or other AA/CR123 light, with the AA extender in place take a 17500?....

The extender would need to be bored out ... and I think that someone on the boards has already done this for an RRT-0.

ScaryFatKidGT · Mar 7, 2012

archimedes said:
The extender would need to be bored out ... and I think that someone on the boards has already done this for an RRT-0.

Damn so the AA extenders are AA only. It just makes sense to me that if a light can run on RCR's/CR123's and AA's/14500's that it would fit a 17500.

archimedes · Mar 8, 2012

ScaryFatKidGT said:
Damn so the AA extenders are AA only. It just makes sense to me that if a light can run on RCR's/CR123's and AA's/14500's that it would fit a 17500.

Not unless you want the AA to rattle

EDIT: You could get a Peak Logan, however ....

Single 17500/18500 light

ScaryFatKidGT

Enlightened

archimedes

Flashaholic

ScaryFatKidGT

Enlightened

archimedes

Flashaholic

Similar threads

Latest posts