Lets see your Vinhnguyen54 drop in setup!

PoliceScannerMan · Dec 16, 2012

We all know Vin has 100's of drop ins out there, and modded lights.

Lets see your set up!

Here's one of mine to get started. A bored 6P, stock switch, Cryos bezel with UCL and blk stainless ring, a U2 direct driven XML (18650) with smooth reflector.

Simple on and off momentary switch, no fuss.

FB672A1E-75D0-4426-94FA-D8600DA906C5-5117-000005657A6AE1D2.jpg

0F9BCC78-D9EA-4A39-9783-C5BD7B921832-5117-0000056580EF5526.jpg

BenChiew · Dec 16, 2012

I got the same drop in that I host with a Surefire M2 bored to take 18650.
My "light them up go to light".

Zigo45 · Dec 16, 2012

Here is my setup. Triad tail cap with mcclicky switch, TL65 body with p60 adaptor, dark sucks TI clip, cryos cooling bezel with 3 trit slot SS bezel ring, 3 green trits installed, and a Vinh 3 mode XML drop in with lop reflector running off 1 18650

0BDA5596-0D52-4404-B630-5E75989FC8AA-340-0000018ABC1288A5.jpg

PoliceScannerMan · Dec 16, 2012

Nice Zigo!!!

Zigo45 · Dec 16, 2012

PoliceScannerMan said:
Nice Zigo!!!

Thanks PSM!

I really like this setup. It started out as a bored 6P, I recently finished building it up.

KuanR · Dec 16, 2012

It's there anything left of the 6p? I don't think there is from what I can see

Can't wait to get my drop in, then I'll post up a picture too

Zigo45 · Dec 17, 2012

KuanR said:
It's there anything left of the 6p? I don't think there is from what I can see

Only the drop in and the battery, nothing left from the 6P host

PoliceScannerMan · Feb 8, 2013

Here's my EDC for the day, RPM tail, FM 1x18350 body, Cryos Cooling bezel, with a Vin XML U2 regulated 4.2A LMH smooth with memory drop in.

9F20A807-F936-44B2-927C-87005C18F474-13259-00000DC2F70EE21D.jpg

SCEMan · Feb 8, 2013

XP-G2 2.1A 3-Mode with SMO & UCL using a 18650

PoliceScannerMan · Feb 8, 2013

Nice!!! What body is that?

SCEMan · Feb 8, 2013

PoliceScannerMan said:
Nice!!! What body is that?

Just your basic Solarforce L2X.

kyhunter1 · Feb 8, 2013

Very nice light. What clip is on the L2X? It looks different than other solarforce clips to me.

SCEMan said:
Just your basic Solarforce L2X.

tobrien · Feb 11, 2013

DD XM-L U2 on a 3P fivemega clone, penta tailcap, cryos bezel. I need to snap some shots of it

i also have a high-strobe Green XP-E from vinh, too

CarpentryHero · Feb 11, 2013

My Vinh p60 is an xml2-U2 is in a Red C2 body with 6pd head and tailcap

7552C748-8C43-480A-A94E-F4E6C4D7431F-12294-00000695F362EE44.jpg

1CCFDEEB-2796-4685-95B1-91FD8470D675-7291-0000042DEF83674D.jpg

jac2001 · Feb 11, 2013

Here's mine!

A 4Sevens Maelstrom G5 modded with a 4000k XPG2 and a single mode 1.8A driver, and a SolarForce L2P with S11 tail cap and pocket clip, housing a Vinh XPG2 p60 with a copper PCB driven to an incredible 2.8A!!!

....and a couple bad beam shots!! Gotta cut back on the caffeine!!!!:shakehead

p60 2.8A

maelstrom G5

Later!!

J.

SCEMan · Feb 11, 2013

kyhunter1 said:
Very nice light. What clip is on the L2X? It looks different than other solarforce clips to me.

It's a NovaTac clip, pretty hard to find nowadays...

Kevin1322 · Mar 26, 2013

I love my Vinh lights!!!

Most of my favorite lights have Vinh's touches. Vinh mods and drops are only replaced by a more recent one of his, and drops will be used in another light, but never shelved. From left to right:

Black Solarforce L2/ S5switch/ Aurora X-06-03 head/ UCL lens with XM-L T6, 1 level, 2.8-6v, 4.2 ampsDirect Drive
Grey Solarforce L2 with XM-L 5000k pushed to 3.42A, 7 mode
Black/grey Solarforce L2w/modded bezel, XM-L T6 6500k, 3 level, 2.8-6v, 3.4 amps
My newest, a Vinh XM-L2 5000k, 4.5 amp, 7 mode (no memory) drop. This is easily the most useful and versatile light I have now. Located in a Solarforce L2T with S11 switch, SS bezel, UCL lens, and 5A McClickie(versatile host as it is), the low is great for indoors and still useful outside for close things. Medium, which should be about 450 lumens, is great for really lighting up a room or yard. And if you need more, high is astoundingly bright! Add the mix of flood and throw, the superb beam profile,and the tint, and....sweeeeet. Add to that, that you have the "hidden" modes of strobe, blink, beacon, and SOS, and you have a light that is going to go everywhere with me when I go to Alaska for 5 months in May!!!
Olight M20 Warrior Premium modded with XM-L U2, 2.8 amps, 7 modes. Cost less than buying the upgraded Olight module (brighter too) and I can now change the levels with the push of the button instead of having to use a second hand to twist the head!
M3 turbo head on L2T, clip, with McClicky, XM-L, 3 level, pushed to 4.42A
Dereelight CL1H V4 with aspheric lens, modded with EZ900 driven 2.1 amps
Maelstrom X10 modded with XM-L U2, pushed to 4.5 amps, 3 level. Everyone should own an X10 with a Vinh mod. If you've seen one, you know what all the excitement is about.
M8 with McClicky, XM-L2 6200k, 3 level, 4.5 amps. Oh so sweet!
Skyray STL-V2 head with C8 body, XM-L U2 pushed at 3.85 amps. Vinh put this whole light together, and is responsible for me now spending so much money on small throw lights haha.
Masterpiece Pro-1 head on L2, Solarforce XR-E R2, 1 level, upgraded to 2.8 amps

Lets see your Vinhnguyen54 drop in setup!

PoliceScannerMan

Flashaholic

BenChiew

Flashlight Enthusiast

Zigo45

Newly Enlightened

PoliceScannerMan

Flashaholic

Zigo45

Newly Enlightened

KuanR

Flashlight Enthusiast

Zigo45

Newly Enlightened

PoliceScannerMan

Flashaholic

SCEMan

Flashlight Enthusiast

PoliceScannerMan

Flashaholic

SCEMan

Flashlight Enthusiast

kyhunter1

Flashlight Enthusiast

tobrien

Flashlight Enthusiast

CarpentryHero

Flashlight Enthusiast

jac2001

Newly Enlightened

SCEMan

Flashlight Enthusiast

Kevin1322

Flashlight Enthusiast

Similar threads

Latest posts