Aleph2 Tri-XPE

Aleph2 Tri-XPE

- Carlo 20mm triple optics
- Cree triple XPE-2 R3 20mm round pcb
- Copper custom made heatsink
- Constant current BadBoy500 driver
- Cree XR-can

LEDs are wired in series in other words each XP-E gets 500mA.
Runs best on 2x CR123 or 2x R123 cells.



Enjoy!

Very nice!

Excellent!:thumbsup:
Is that a RPM bezel?

That looks great, I always wanted an A2 and thought I'd see more of these when the 20mm Carlco Triples started.

Do the XP-E throw any better out of that optic than the XP-G?

And I always forget about the Badboy drivers boost, Assuming a body with room, could it run off 2 RCR123?

Light11 said:

Excellent!:thumbsup:
Is that a RPM bezel?

Click to expand...

Yep!

nein166 said:

That looks great, I always wanted an A2 and thought I'd see more of these when the 20mm Carlco Triples started.

Do the XP-E throw any better out of that optic than the XP-G?

And I always forget about the Badboy drivers boost, Assuming a body with room, could it run off 2 RCR123?

Click to expand...

Yes, XR-E's throw better than XP-G's. That's why I prefer XP-E's for these mods.
This setup runs best off two RCR123 (see first post).

TranquillityBase said:

Very nice!

Click to expand...

Yes indeed !


Good job again !! :thumbsup:

That looks really sweet! oo:
Not sure that I've seen an HA Aleph 2 before and the titanium bezel finishes it off nicely.:thumbsup:

Very nice indeed. I'm sure it would work in my TB A2 Ti head too.

easilyled said:

Very nice indeed. I'm sure it would work in my TB A2 Ti head too.

Click to expand...

... a TB A2 Ti ? .... sorry Daniel, but I don't believe it until you post a picture here. :lolsign:

Icarus said:

... a TB A2 Ti ? .... sorry Daniel, but I don't believe it until you post a picture here. :lolsign:

Click to expand...

Its the light at the bottom of the picture below:-



I could swap the 2 X CR123 body that the Aleph1 head is on and use your triple XPE-2 L.E

you are making me jealous now........
What a great Aleph collection and all made by TB............:twothumbs

Icarus said:

you are making me jealous now........
What a great Aleph collection and all made by TB............:twothumbs

Click to expand...

Thanks, but I'm sure that I'm far more jealous of your amazing skills Freddy. :mecry:

Its one thing being able to appreciate and purchase beautiful pieces of art and its very nice, but being able to do the work for myself would still be infinitely more satisfying.

I do remember i have an Aleph2 from TB but it was tucked away somewhere on the top shelf... for so long... lol !!

criollo said:

I do remember i have an Aleph2 from TB but it was tucked away somewhere on the top shelf... for so long... lol !!

Click to expand...

That's a beautiful light and picture. I like the Origami.
Freddy's set-up would go well in both our lights.

criollo said:

I do remember i have an Aleph2 from TB but it was tucked away somewhere on the top shelf... for so long... lol !!

Click to expand...

you never told me you owned this beauty. Very nice picture too! :thumbsup:

It looks like I'm the only one here without a TB Aleph2 ti... :mecry:

easilyled said:

That's a beautiful light and picture. I like the Origami.
Freddy's set-up would go well in both our lights.

Click to expand...

Daniel, you have an elegant collection of TI Aleph Flashlights !

Unfortunately that's the only Ti A2 i have with a cr123 body. Just love the croc design. Wish i could have a 2x 123/18650 body to go with this mod.

Icarus said:

you never told me you owned this beauty. Very nice picture too! :thumbsup:

It looks like I'm the only one here without a TB Aleph2 ti... :mecry:

Click to expand...

Despair not my friend...... i am sure Scott is listening and he needs to work his magic on the lathe to feed our addiction.