• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired (SOLD or W/D): V10R Ti Hanko/SOYCD, ADDED: Flucero Tri-EDC LE

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
When you buy new toys sometimes you have to let some other loved ones go..........

As usual the following sales rules apply:



  • First posted "I'll take it." gets the item over any PM's in progress.
  • Prompt (within 24 hours) PayPal payment expected via normal Purchase option.
  • CONUS shipping is included via USPS.
  • International shipping will be $10 additional for USPS first class. PM for other options.
  • Please - no trade offers.
  • I reserve the right to refuse sale.

ADDED: Flucero modified Tri-EDC light engine. Pulled from a recent purchase this light engine will fit any Mac's Customs Tri-EDC light. It features upgraded Nichia 219A HiCRI LEDs and a custom Low/High 2-level driver. I measured the driver to run at ~30mA low and 2.5A high. The tint and beam produced are very nice. I'll include a Carlco frosted narrow optic with this light engine.

Price: $90 SOLD

Flucero28_LoHi_Tri-EDC_LE.jpg


1) First up is a XM-L2 HiCRI Sunwayman/JHanko/SOYCD V10R Ti custom light. This light is in excellent condition. Freshly polished up with not a single scratch or ding. Features include:


  • XM-L2 S6-7D3 90+ HiCRI (LED swap option. If you prefer I will swap a 4000K XM-L2 T5-5C1 in prior to shipping)
  • Jeff Hanko custom clip.
  • Jeff Hanko debadged and crenelated bezel.
  • Jeff Hanko 18mm bore and sleeve. Compatible with both 16mm (CR123/RCR123/16340) and 18mm (18350) cells.
  • 12-trit drilled cooling fin. I am not sure who drilled the holes but they are very clean. Filled with a Yellow/Orange/Red trit scheme using 6mm trits.
  • SOYCD V10R Ti 6-Trit E-Switch filled with Yellow/Orange/Red 6mm trits to compliment the cooling fin pattern. Switch tweaked for higher sensitivity.
  • Lower-low mod.
  • Helical grease re-lube done on adjustment ring for nicer feel.

Price: $450 WITHDRAWN

V10R_Ti_HiCRI_XML2_01.JPG


V10R_Ti_HiCRI_XML2_02.JPG


V10R_Ti_HiCRI_XML2_03.JPG


V10R_Ti_HiCRI_XML2_04.JPG


V10R_Ti_HiCRI_XML2_05.JPG


V10R_Ti_HiCRI_XML2_06.JPG


2) LiteFlux LF4. I purchased this light about a month ago. Originally sporting a SSC-P4 LED I have modded it to a XP-G2 R5-5A3 neutral tint. Features a SMO reflector which provides for a great beam with a good amount of punch for a light this size. This light also features LiteFlux's unique programming for an endless variety of level options. I would personally call this an Aeon on steroids. I think this light is just as nice as an Aeon with the added ability of programming the levels you want. Runs on CR2 size batteries.
For US orders I will also include 2 Duracell CR2 batteries that are nearly brand new and a nearly new Pearstone Rechargeable CR2 (http://www.amazon.com/dp/B006BGUVNS/?tag=cpf0b6-20) LiIon battery that's been charged up twice.
Complete with box, grease, spare o-rings, color filters, diffuser tube.

Price: $90 SOLD

LF4_XPG2_01.JPG


LF4_XPG2_02.JPG


LF4_XPG2_03.JPG


LF4_XPG2_04.JPG


3) FM 2x18500 and FM 2x18650 C2C black HA bodies, Surefire Black head with SS Xeno bezel ring, Surefire black stock tailcap. Selling this as a complete package.

Price: $90 SOLD

FM_SF_Parts.JPG


4) FM D26 G2 bi-pin adapter assembly with SMO and Light Stipple reflectors. Includes one CL1794 bulb (1,000 lumens).

Price $60 SOLD

FM_D26_G2_01.JPG
 
Last edited:

ma tumba

Flashlight Enthusiast
Joined
Oct 7, 2013
Messages
1,344
Location
Russia
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

I'll take the FM D26 G2 bi-pin adapter assembly
 

ma tumba

Flashlight Enthusiast
Joined
Oct 7, 2013
Messages
1,344
Location
Russia
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Regarding the FM tubes, do they accept those D26 adapters as well as solarforce bodies? My D26 G4 really didn't fit in a 6P/C2, only a SF.
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

The FM tubes do take the D26 adapters. I've found you need to put a small piece of spring on the end to get good contact though. Although, I've had no problem getting the D26 G2 to fit into a C2.
 

A.D.D.i.c.t.

Newly Enlightened
Joined
Jul 4, 2011
Messages
113
Location
Texas
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Pm sent on liteflux.
 

RUSH FAN

Flashlight Enthusiast
Joined
Nov 22, 2013
Messages
1,172
Location
USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Beautiful V10r ti. Good luck with your sales.
Personally, I own your #9 from last year's run.
It's not as nice looking as yours, but it is part of my daily EDC and really like it.

Cheers
 

blackbalsam

Flashlight Enthusiast
Joined
May 18, 2009
Messages
1,583
Location
WNC
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

i'll take it
2) LiteFlux LF4
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Beautiful V10r ti. Good luck with your sales.
Personally, I own your #9 from last year's run.
It's not as nice looking as yours, but it is part of my daily EDC and really like it.

Cheers

Thank you.

I am so happy you are pleased with the CPF run #9. It means a lot to me that the people who bought them are hanging onto them and getting use out of them. I think I've only seen two posted for sale since the run last year.
 

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Thank you.

I am so happy you are pleased with the CPF run #9. It means a lot to me that the people who bought them are hanging onto them and getting use out of them. I think I've only seen two posted for sale since the run last year.

If I had a chance again I would NOT have sold my light! I totally regret selling it, it was THE best V10R I have had. If it weren't for the awesome TNC 26650 Dragon light I would not have let it go.

Anyone who is debating whether or not to get this V10R, I strongly suggest you get it. Any V10R that passes through Sean's hands always comes out being the best V10R's functionally and aesthetically.
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Thanks for the compliment Ryan.

If anyone is teetering on the V10R purchase because of the tint I will happily swap out the HiCRI XM-L2 for a more neutral 4000K XM-L2 T5-5C1 before shipping.
 

7romanstatesmen

Newly Enlightened
Joined
Aug 9, 2007
Messages
25
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

I'll take:
3) FM 2x18500 and FM 2x18650 C2C black HA bodies, Surefire Black head with SS Xeno bezel ring, Surefire black stock tailcap. Selling this as a complete package.
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

I'll take:
3) FM 2x18500 and FM 2x18650 C2C black HA bodies, Surefire Black head with SS Xeno bezel ring, Surefire black stock tailcap. Selling this as a complete package.

Hi - you got it. PM on it's way.
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

Robert - you package went in the mail this afternoon.

I'll take:
3) FM 2x18500 and FM 2x18650 C2C black HA bodies, Surefire Black head with SS Xeno bezel ring, Surefire black stock tailcap. Selling this as a complete package.

PP received. I will pack it up and bring it to the PO tomorrow morning.
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: WTS: V10R Ti Hanko/SOYCD, Liteflux LF4 XP-G2 mod, FM D26 G2 bi-pin, FM 18mm, Sure

ADDED: Flucero modded Tri-EDC N219 light-engine.
 
Top