ArmyTek
Enlightened
All Dobermann discussions in one place.
You are welcome.
You are welcome.
That's a nice commendation.
I'm thinking about a Doberman as opposed to a Partner or Prime for a short range shotgun light.
I wish I could try them all first.
I love my doberman.
But the low mode is too high and no strobe. the reason is that I bought and was a model "first batch" or pre-production. I paid full price for an official seller of Armytek. It is a very ugly practice on its side and never did the right thing would have been to offer a production unit.
I think Armytek should not sell these units. Or if sold, should clearly indicate the dealer must say they are not final versions, will not have the final characteristics ....
When will the Dobermann XPH 35 HI be available to buy?
When will the Dobermann XPH 35 HI be available to buy?
Hi, Armytek. I recently received my replacement Dobermann Pro, after more than 4 months of waiting.
It appears to be the newer model that requires 5 twists to disable strobe.
I've measured only 2 amps at the tail.
My DMM is accurate, based on measurement results for my other lights with known drive currents.
Based on ceiling bounce tests with my other lights with known OTF output, my Dobermann is producing less than 800 OTF lumens.
Please confirm whether specifications have changed or my sample does not meet specification and should be a valid case for another exchange.
Thanks.
Hi!
Can you please write what equipment for measurements do you use?
I measured mine at 3.3 amps. I'm very happy with my dobermann. It matches the throw of my much bigger but much older olight sr51, at least to my eyes. You might not be pressing the probes hard enough on the dobermann body.when I first measured amperage draw I got 2.3 amps, but with the probes held with greater pressure I measure 3.3 amps