This is the first light off my mini-lathe. I deemed it the chatter star as I really didn't know what I was doing, and was learning along the way and there's lots of chatter marks, especially on the area around the switch boot that gives it a starburst like pattern.
3 piece body, mcclicky in tail. tail is sort of E series compatible. I had it on an E2E before, but had others it didn't fit. head is not really compatible though it does have an Aleph style engine in it, so it may work with some other legos.
My threading still sucks, but getting better.
I was originally shooting for this to be a CR2 sized light, but it was too long. I will include a 16340 battery (Fake AW I think) that fits. has a dent in the middle of the button top for best fitment.
Engine is unknown maker and driver (older), but supports 16340 fine. it does have last mode memory. I put on a MC-E emitter, and it works great. L-M-H, 3 modes (10ma, 120ma, 560ma).
Head is really deep (like I said, I didn't really know what I was doing) so with the mule and being recessed, the beam is more focused flood like a non-zooming aspheric, than pure flood like a normal mule would be.
Glass 1mm thick lens held in with green and blue o-rings as shown. green glow paint on engine surrounding the emitter.
Be the one to own an irrelevant piece of non-history! :green: :sick2:
SOLD - $67 shipped. CONUS only.
3 piece body, mcclicky in tail. tail is sort of E series compatible. I had it on an E2E before, but had others it didn't fit. head is not really compatible though it does have an Aleph style engine in it, so it may work with some other legos.
My threading still sucks, but getting better.
I was originally shooting for this to be a CR2 sized light, but it was too long. I will include a 16340 battery (Fake AW I think) that fits. has a dent in the middle of the button top for best fitment.
Engine is unknown maker and driver (older), but supports 16340 fine. it does have last mode memory. I put on a MC-E emitter, and it works great. L-M-H, 3 modes (10ma, 120ma, 560ma).
Head is really deep (like I said, I didn't really know what I was doing) so with the mule and being recessed, the beam is more focused flood like a non-zooming aspheric, than pure flood like a normal mule would be.
Glass 1mm thick lens held in with green and blue o-rings as shown. green glow paint on engine surrounding the emitter.
Be the one to own an irrelevant piece of non-history! :green: :sick2:
SOLD - $67 shipped. CONUS only.
Last edited: