Hi,
Anybody who has a drawing for a video light head they want to share? I'm planning on turning a light head or two out of aluminium on a lathe, and I'm looking for tips or a finished drawing with measurements (preferable metric) for making one. I will probably need to place the driver in the head for cooling as the canister most likely will be from some plastic or delrin.
I'm will be using the Bridgelux Vero 29 LED array and TaskLED Hyperboost driver. Initially planning to have two smaller heads and a seperate battery canister.
So the design needs to account for the LED-array, driver, maybe the hallswitch for on/off and dimming, and front glass that provide sufficient cooling for running it at max 3200mAh (120W) and tolerate depths of up to 150 msw/ 500ft.
All tips are very welcome
http://www.newark.com/bridgelux/bxrc-50g10k0-l-24/led-hb-cool-white-10000lm-5000k/dp/30Y8179
http://www.taskled.com/hboost.shtml
Anybody who has a drawing for a video light head they want to share? I'm planning on turning a light head or two out of aluminium on a lathe, and I'm looking for tips or a finished drawing with measurements (preferable metric) for making one. I will probably need to place the driver in the head for cooling as the canister most likely will be from some plastic or delrin.
I'm will be using the Bridgelux Vero 29 LED array and TaskLED Hyperboost driver. Initially planning to have two smaller heads and a seperate battery canister.
So the design needs to account for the LED-array, driver, maybe the hallswitch for on/off and dimming, and front glass that provide sufficient cooling for running it at max 3200mAh (120W) and tolerate depths of up to 150 msw/ 500ft.
All tips are very welcome
http://www.newark.com/bridgelux/bxrc-50g10k0-l-24/led-hb-cool-white-10000lm-5000k/dp/30Y8179
http://www.taskled.com/hboost.shtml