Size, weight and output comparisons, V11r w AA extender.. RRT-01 w 18350, Eye10 16340

jon_slider

Flashlight Enthusiast
Joined
Mar 31, 2015
Messages
5,155
UKkMLhkl.jpg


l1queRBl.jpg


Jx1IwTLl.jpg


5oLdZnwl.jpg


xU1eLIGl.jpg
 
Last edited:

lightfooted

Flashlight Enthusiast
Joined
May 6, 2010
Messages
1,017
I dunno...my V11R seemed to more closely match my P60 drop-ins when running on a Li-Ion. I'd say 330-350 lumens roughly because I compared it with my original Olight M22 when it had the SST40 and was found to be throwing out around 320 lumens (Not the advertised 500) and the V11R seemed brighter in my bounce test but not significantly.
 

jon_slider

Flashlight Enthusiast
Joined
Mar 31, 2015
Messages
5,155
... my V11R... say ... 350 lumens

thats a good guess,
off by less than 20% from my V11r measured output, before the LED was changed
(High CRI LED swap increases CRI and lowers the output.. worth it to me for better tint and color quality)

I measured 420 lumens on the V11r with the stock Low CRI, Green Tinted XM-L2 LED w a 16340,
(box says up to 570 lumens... it also says the low is 1 lumen, the measured low on my light is 0.01 lumens)

my Original RRT-01 w stock XM-L2 reaches 586 lumens, w 16340, package says 600 lumens...

More output info.. Original RRT-01 using IMR 18350
640 lumens w Low CRI stock XM-L2
545 lumens w High CRI LH351d 5000k, a 15% drop
408 lumens w Higher CRI 219b sw45k , a 36% drop
 
Last edited:
Top