- Joined
- Feb 2, 2006
- Messages
- 1,151
After some six months of planning, testing etc. the said replacement boots are finally available.
And since Pelican does not offer them as parts this will be the only place you'l get them.
Item description:
a. High-quality clone of the stock M1/M3/M6 rubber boot down to the original specifications (ie. "faithful reproduction")
b. Made with high quality, high density silicone material for better longevity and good abrasion resistance (as compared to stock rubber which would age and harden in the long run)
c. Press area diameter ~16mm, base flange diameter ~22mm; boot total height ~6mm
d. Silicone hardness (density) 70 (out of 100 scale)
e. Available in Black, Hunter Orange and GID Green
f. Compatible with tailcap assys from both pre- and post-2014 M6 batches (2320/2330/2390), as well as incandescent M1 (3310) and M3 (3370) models
g. All boots go through straight vetting process to ensure they are at least as good as the original
NOTE:
a. Proper flashlight maintenance skills and additional tools required to access and replace switch boot
b. Some cosmetic imperfections/blemishes may be visible on GID green boot variant due to occasional uneven fluorescent powder application onto the silicone substrate; this will not affect normal boot/tailcap usage and functionality
What you get from this sale is
- ONE set of three replacement boots (one per each color)
NO other parts, components etc. included
Listing pictures for reference only
Other quantities may be available; please PM for details
Only registered international shipping provided (NO other lower-tier shipping options available)
Shipping insurance may be available at extra charge (where applicable)
All boots will be rechecked prior to shipping
Price: $6.95 per set
Registered shipping $4.50 (add $0.50 per each subsequent set)
Only PayPal payments accepted (Please PM for payment details)
Please send PM for any questions.
Thanks for reading
And since Pelican does not offer them as parts this will be the only place you'l get them.
Item description:
a. High-quality clone of the stock M1/M3/M6 rubber boot down to the original specifications (ie. "faithful reproduction")
b. Made with high quality, high density silicone material for better longevity and good abrasion resistance (as compared to stock rubber which would age and harden in the long run)
c. Press area diameter ~16mm, base flange diameter ~22mm; boot total height ~6mm
d. Silicone hardness (density) 70 (out of 100 scale)
e. Available in Black, Hunter Orange and GID Green
f. Compatible with tailcap assys from both pre- and post-2014 M6 batches (2320/2330/2390), as well as incandescent M1 (3310) and M3 (3370) models
g. All boots go through straight vetting process to ensure they are at least as good as the original
NOTE:
a. Proper flashlight maintenance skills and additional tools required to access and replace switch boot
b. Some cosmetic imperfections/blemishes may be visible on GID green boot variant due to occasional uneven fluorescent powder application onto the silicone substrate; this will not affect normal boot/tailcap usage and functionality
What you get from this sale is
- ONE set of three replacement boots (one per each color)
NO other parts, components etc. included
Listing pictures for reference only
Other quantities may be available; please PM for details
Only registered international shipping provided (NO other lower-tier shipping options available)
Shipping insurance may be available at extra charge (where applicable)
All boots will be rechecked prior to shipping
Price: $6.95 per set
Registered shipping $4.50 (add $0.50 per each subsequent set)
Only PayPal payments accepted (Please PM for payment details)
Please send PM for any questions.
Thanks for reading