Looking for a fix?

Hi all,
I have done some searching and it has not been of much help for the problems I am having. It may just be that any posts on the subject are further back then I have had the time to deal with so here it is.

My favorite little EDC my Micro Illuminator has been giving me some greef.
First the ring for key chain broke and I haven't found a good fix for that as of yet.
Has there been anything that has worked well for the rest of you owners of the Micro Illuminators?

The other issue would be that the nice little lock out switch is shorting on me and not giving full contact all of the time. I have dinked with the switches spring from time to time and had a little bit of luck with that but I am looking for a more perminent fix for the intermitent short in the switch.
Is there a cure that has worked well for this as of yet?

Fingers crossed,
Wylie

Hi Wylie,

A good fix would be the Micro-Illuminator repair kit.

Brinkmann Legend 1AAA with mineral glass and modified reflector; just swap the Micro-Pill into the new host - $11.00 shipped (USA & Canada) International add $5.00

Or, you could get just the Micro-Hull; no reflector and no mineral glass. $8.00 shipped (USA & Canada) International add $5.00

All contact surfaces cleaned with R5 Power Boost for flicker free operation.

And both come with new key ring gizmos....