Jul 15, 2005 #1 T Toecutter Newly Enlightened Joined Jul 26, 2003 Messages 33 Got an L6, put the cell extender on the run it off of 4 cells, which you are supposed to be able to do, and it doesn't light up... Any suggestions?
Got an L6, put the cell extender on the run it off of 4 cells, which you are supposed to be able to do, and it doesn't light up... Any suggestions?
Jul 15, 2005 #2 B Bullzeyebill Flashaholic Joined Feb 21, 2003 Messages 12,164 Location CA Did it work with three cells. Using Cr123's, right? Bill
Jul 15, 2005 #3 T Toecutter Newly Enlightened Joined Jul 26, 2003 Messages 33 worked fine with three cells. Add the extender...nothing..
Jul 15, 2005 #4 M Mags Flashlight Enthusiast Joined Oct 16, 2004 Messages 2,096 Location NY EDIT woops thought you were talking about the M3T....
Jul 15, 2005 #5 T Topper Flashaholic* Joined Dec 1, 2003 Messages 2,630 Location North East Arkansas I use my L6 head on a M4 body at times and it works fine. I never tried an A19 on the L6 but it should work. Bad connection? tailcap out of whack? Not sure if you have a couple different tailcaps try swapping them around to see. Topper
I use my L6 head on a M4 body at times and it works fine. I never tried an A19 on the L6 but it should work. Bad connection? tailcap out of whack? Not sure if you have a couple different tailcaps try swapping them around to see. Topper
