KevinL
Flashlight Enthusiast
Cleaning out the junk:
A 2 x Maglite reflectors, mint condition and pulled fresh from Mags ($4 each)
D Stainless steel 1AAA light with electronic switching. Modified with 26K LED. Can re-mod it to 35K if you want, costs extra. $10 - with 26K
F Maglite Luxeon drop in with PR base - press fit model. You unscrew your Maglite, take out the normal bulb, and push this one in. Press-fits itself into the light. LIKELY TO BE PERMANENT after you install it, you can get it out, but it's a lot of work. Seat the included SO20XA reflector on top of it and screw the head on. For 3D Mags, can be modified to suit 4D/5D with the appropriate resistor (PM me for info). Comes with Q-bin Luxeon 1 (that can be overdriven to full Lux3 brightness safely). EXCELLENT heatsinking capability. You can do this mod in 5 minutes and no soldering is required. $25.
G Maglite Luxeon screw-in with PR base - screws into the head. Same as above, comes with Q-bin Lux1 and SO20XA, but is easier to remove and non-permanent. For 3D Mag, can be modified (PM me). Excellent heatsinking capability. You can do this mod in 5 minutes and no soldering is required. $30.
They look like this once installed.
Shipping included in prices, post here or PM to take it. Cash/eCheck or credit Paypal ONLY (4% extra for CC).
Updated to reflect what's left for sale.
A 2 x Maglite reflectors, mint condition and pulled fresh from Mags ($4 each)
D Stainless steel 1AAA light with electronic switching. Modified with 26K LED. Can re-mod it to 35K if you want, costs extra. $10 - with 26K
F Maglite Luxeon drop in with PR base - press fit model. You unscrew your Maglite, take out the normal bulb, and push this one in. Press-fits itself into the light. LIKELY TO BE PERMANENT after you install it, you can get it out, but it's a lot of work. Seat the included SO20XA reflector on top of it and screw the head on. For 3D Mags, can be modified to suit 4D/5D with the appropriate resistor (PM me for info). Comes with Q-bin Luxeon 1 (that can be overdriven to full Lux3 brightness safely). EXCELLENT heatsinking capability. You can do this mod in 5 minutes and no soldering is required. $25.
G Maglite Luxeon screw-in with PR base - screws into the head. Same as above, comes with Q-bin Lux1 and SO20XA, but is easier to remove and non-permanent. For 3D Mag, can be modified (PM me). Excellent heatsinking capability. You can do this mod in 5 minutes and no soldering is required. $30.
They look like this once installed.
Shipping included in prices, post here or PM to take it. Cash/eCheck or credit Paypal ONLY (4% extra for CC).
Updated to reflect what's left for sale.
Last edited: