Recent content by LAB

fenix-store
  1. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 All I know is mine are bright and I like them all. They have yet to fail me. You do good work Vinh.
  2. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 Stock Solarforce. Tailcap switch and all.
  3. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 I wrap all my drop ins with copper tape. I have a DD xml-u3 that I run continuously. I don't have any overheat problems. I don't know why.
  4. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 I run all 5 of my drop ins in solarforce hosts. All are 4 amp and above. I run them on average 10 -15 minutes at a time continuously. The MT-G2 is the only one I have to turn off because of heat.
  5. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 I had the same problem until I got some AW 18650's. The protection circuit has not tripped yet. I ran it for about 25 minutes tonight[ not continuous]. After the batteries drain down some it only gets warm.
  6. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 No, I am not using IMR's, I use regular 18650's. I burned up my first one using IMR's.
  7. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 When I ran my MT-G2 drop in on Eagletac 3100mah 18650"s it would run a few minutes and then turn off. It seems the protection circuits in the batteries kicked in. When I run it on AW 2600's, it doesn't turn off at all...
  8. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 I use a solarforce host with extension tube for 2 18650's and an A001 head on it. Copper wrapped.
  9. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 My second MT-G2 is running fine. I use 2 AW 2600mah 18650's with no problems.
  10. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s, MT-G2 ;-) I have gone 9 minutes + continus run time in my solarforce host.
  11. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s, MT-G2 ;-) It kept shinng, it just had a large dark spot in the beam. It still works. I just don't like the beam now. When I look at the LED there is no discernable difference from my other one.
  12. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 Dropn Ins All Copper Bonded PCBs even XP-G2s2 When I burned up my first MT-G2, it happened almost immediately after I turned it on with IMR 18650's in it. It didn't even have time to get hot yet. So I suggest not using IMR's at all. In my second one, I run AW 2600mah...
  13. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2 I have both, courtesy of Vinh, and yes the MT-G2 is brighter. It also gets much hotter much faster.
  14. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2 It is very bright. I am completely happy with it. Thanks.
  15. L

    WTS: P60 Drop in Light Engine

    Re: vinhnguyen54 D26 P60 COMBINED XP-E2, XM-L2, XP-G2, SBT, SST, Color LEDS, Nichia 2 I honestly don't know why my XML U3 DD drop-in doesn't get very hot. Maybe the host limits the current draw. I run it with an IMR 18650.
See more

Latest posts

Top