18650 Extender for JetBeam RRT-01/TC-R1?

[jedirock]

Thats awesome! Can we see the look on a torch)

If you check post 34, you can see the original look before the grooves were added. Post 43 shows what it looks like after the grooves.

 

[gunga]

Ugh. Must have missed that on second glance. I'm still in for 18650 and 18500.

 

[mohanjude]

I have looked through the list and compiled the following. I have x16 18650 extensions and x10 18500 extensions in Titanium. I will take some photos tomorrow of the finished product when I get the opportunity to go to the shop and pick up the tubes. Once I have the photos I will start a separate sales thread and put the link in a post on this thread. I need to negotiate with the shop to quickly do some Aluminium tubes. They did give me the 'look' as I think they want me to take my turn again as it is considered another job. Maybe I can convince them to do it quickly while the tooling is still set up on the CNC.

Expression of interest.

1.Jedirock x1 Titanium 18650
2.Shikar x1 Titanium 18650
3.Gunga x1 Titanium 18500 & 18650
4.Diablo331 x1 Titanium 18650
5.Tofty x1 Titanium 18650 & 18500
6.Larbo x1 Titanium 18650
7.Flucero28 x1 Titanium 18500

8.rufus001 ??? size

9.ColonelSanders x1 Titanium 18650

10.F250XLT ??? Size x1 18650

11.Zeruel x1 18650 Titanium
12.Beach Honda x1 18650 Titanium tube
13.Cubebike x1 18650 Titanium tube
14.aau007 x1 Aluminium 18650
15. mr.sankeman x2 Titanium 18500 tube
16.ErichM x1 Titanium x1 Aluminium 18650
17. Espionage Studio ?18650 Titanium extender
18 Jorgen x2 Titanium 18500 + Aluminium 18650

 

[mr.snakeman]

Please see my posts #76 and #79 (I want to be able to use both battery sizes). Thanks

 

[Zeruel]

11.Zeruel ??? one or two ?? size

Pardon me for being vague, my interest is for 1 x Ti 18650 extender (for the moment).

Thanks!

 

[mohanjude]

Pardon me for being vague, my interest is for 1 x Ti 18650 extender (for the moment).

Thanks!

fixed!

 

[SPNKr]

Will the aluminium ones be HA or raw?

 

[Colonel Sanders]

No need for mine to be titanium. Aluminum is fine. Also, I only need this IF it'll fit an EYE10. I can only assume that it does but I don't know. Can anyone confirm that they are threaded the same?

So 2 x 18500s will fit an 18650? I like that idea. I would need an extra o-ring, right?

 

[Tofty]

I'd like one of each length in Ti if thats ok.

 

[gunga]

Sorry, my posts indicate I was interested in 18500 AND 18650. One of each.

 

[mohanjude]

No need for mine to be titanium. Aluminum is fine. Also, I only need this IF it'll fit an EYE10. I can only assume that it does but I don't know. Can anyone confirm that they are threaded the same?

So 2 x 18500s will fit an 18650? I like that idea. I would need an extra o-ring, right?

I cannot at this stage be ure about the aluminium. You can certainly buy x2 18500 in Ti.

 

[mohanjude]

Will the aluminium ones be HA or raw?

It will be raw.

 

[aau007]

Mohanjude,

Have you determined the final pricing for the tubes?

 

[mohanjude]

Mohanjude,

Have you determined the final pricing for the tubes?

Not yet... It will be around the ball park figure for Ti 18650 $50 plus shipping. I need to work out the price for Ti 18500 which I think $30 is fair price and once I cost up the aluminium and it actually happens I can report it on the sales thread. The aluminium will be cheaper but not that much less as the bulk of the cost is labour and the initial tooling costs.

 

[Larbo]

Will you offer extra o rings also?

 

[jdriller]

Hey mohanjude.
Please put me on the Ti 18650 list, if still available.
Thanks!

 

[mohanjude]

New sales thread started in CPF

https://www.candlepowerforums.com/threads/341988

 

[mohanjude]

Hey mohanjude.
Please put me on the Ti 18650 list, if still available.
Thanks!

I have added your name to the list.

 

[Quicksands]

Would you consider making or have any 18650 extender for the JetBeam.