Last chance...Anymore updates you think is needed?
DriverVN3 – Rear Clicky Switch
Prospective improvement
1. New 7135 true moonlight mode
2. Turbo timer default at 5 minutes, ramp down 1 level only
3. Add true low voltage power cut off at ~ 3V for unprotected cells
4. Easy on off thermal sensor option if available
5. Default thermal setting set
6. Voltage check function
7. As short as possible memory/no memory time
8. Change the current 8 presses to enter programming mode to 10 presses but make it less quickly
9. Mode spacing will be adjusted for more visually linear
Mode Groups
1. 100 (Great for gun lights or aspheric spotter)
Lots of 2 mode group because most people like their light simple for real work
3. 5 - 100 | Memory
4. 5 - 100 | No Memory
5. 100 - 5 | No Memory
6. 25 - 100 | Memory
7. 25 - 100 | No Memory
8. 100 - 25 | No Memory
9. 50 - 100 | Memory
10. 50 - 100 | No Memory
11. 100 - 50 | No Memory
3 mode group are popular for the general
12. ML - 25 - 100 | Memory
13. ML - 25 - 100 | No Memory
14. 100 - 25 - ML | No Memory (DEFAULT group because it's simple and it turns on at High, How a V54 should be ;-)
15. 25 - 100 - ML | No Memory (Some people use Medium the most)
4 mode group
16. ML - 1 – 20 - 50 - 100 | No Memory
17. 100 - 50 – 20 - 1 - ML | No Memory
Too many modes for me but not enough for others
18. ML - 1 – 5 - 15 - 50 - 100 | No Memory
19. 100 - 50 - 15 - 5 – 1 - ML | No Memory
Tactical/LEO
20. Strobe
21. 100 - Strobe | No Memory
22. Strobe – 100 | No Memory
23. 100-25-Strobe | No Memory
Disco
24. 15 - 100 - BLINK.5hz - Blink1Hz - BLINK2Hz - BLINK3Hz – Bike Strobe – ConstantOn Beacon| No Memory
Bike Light
25. 10 - 25 – 50 - 100 - Bike Strobe
DriverVN3 – Rear Clicky Switch
Prospective improvement
1. New 7135 true moonlight mode
2. Turbo timer default at 5 minutes, ramp down 1 level only
3. Add true low voltage power cut off at ~ 3V for unprotected cells
4. Easy on off thermal sensor option if available
5. Default thermal setting set
6. Voltage check function
7. As short as possible memory/no memory time
8. Change the current 8 presses to enter programming mode to 10 presses but make it less quickly
9. Mode spacing will be adjusted for more visually linear
Mode Groups
1. 100 (Great for gun lights or aspheric spotter)
Lots of 2 mode group because most people like their light simple for real work
3. 5 - 100 | Memory
4. 5 - 100 | No Memory
5. 100 - 5 | No Memory
6. 25 - 100 | Memory
7. 25 - 100 | No Memory
8. 100 - 25 | No Memory
9. 50 - 100 | Memory
10. 50 - 100 | No Memory
11. 100 - 50 | No Memory
3 mode group are popular for the general
12. ML - 25 - 100 | Memory
13. ML - 25 - 100 | No Memory
14. 100 - 25 - ML | No Memory (DEFAULT group because it's simple and it turns on at High, How a V54 should be ;-)
15. 25 - 100 - ML | No Memory (Some people use Medium the most)
4 mode group
16. ML - 1 – 20 - 50 - 100 | No Memory
17. 100 - 50 – 20 - 1 - ML | No Memory
Too many modes for me but not enough for others
18. ML - 1 – 5 - 15 - 50 - 100 | No Memory
19. 100 - 50 - 15 - 5 – 1 - ML | No Memory
Tactical/LEO
20. Strobe
21. 100 - Strobe | No Memory
22. Strobe – 100 | No Memory
23. 100-25-Strobe | No Memory
Disco
24. 15 - 100 - BLINK.5hz - Blink1Hz - BLINK2Hz - BLINK3Hz – Bike Strobe – ConstantOn Beacon| No Memory
Bike Light
25. 10 - 25 – 50 - 100 - Bike Strobe