LED Lenser T7 died, recommend me a similar/superior replacement

strikers

Newly Enlightened
Joined
Aug 11, 2013
Messages
2
Hi all,
I recently had my LED Lenser T7 die on me. I really liked the size of this flashlight and the focusable beam. Is there any alternatives which are similar to this flashlight? Looking at AA as I have plenty of eneloops.


1) How would you prefer to purchase the light?

____This will be mail-order or Online (location doesn't matter).


2) Budget: An easy question, but you may change your mind after answering the rest! :)

____Up to $100.


3) Format:

____I want a flashlight (hand held/self contained).


4) Size:

____SMALL - Every day carry (4-7 inches).
____MEDIUM - Holster/belt ring carry. (>7 inches)


5) Emitter/Light source:

____LED (known for efficiency, longevity, and compactness)


6) Manufacturer:

____I want to buy a light from a large/traditional manufacturer that is ready to go out of the box.


7) What power source do you want to use?

____I intend to use Rechargeable cells (NiMH or NiCD) based on the usual AAA/AA/C/D sized cells common to most stores.


8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is not a happy experience).

____I want to illuminate my entire backyard or a campsite (150-300 lumens).

____SPECIAL NOTE: Burst/Turbo mode Category - There are several lights that will run at a super bright maximum for a very limited period (usually 5-10 minutes) and then will "step-down" to a lower level for thermal control. Check here if this is acceptable.


9) Flood vs Throw: Flood covers an area, Throw reaches out to a distance.

____Wide Flood: I want a defined flood area for semi-close tasks like after-dark campsite tasks or working on a car.
____Wide Throw: I want a beam with a noticeable hot-center for distance throw and a significant amount of "side-spill". Good for rough trail hiking, search and rescue, and general distance work.
____Narrow Throw: I want a beam with a very tight "hot center" and minimal "side-spill". Good for distance viewing, fog, and looking through dense undergrowth.

9a) Distance: How far away will you typically need to see with this light (check all that apply)
____Less than 1 yard/meter (reading, other close work)
____Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
____5-20 yards/meters (check out a noise in the backyard)
____30-50 yards/meters (I have a big backyard)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)

10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum continuous output).

____90-120 minutes (Runtime is moderately important, but still not critical)



11) Durability/Usage: Generally the old phrase "you get what you pay for" is very accurate for flashlights.

____Very Important (Camping, Backpacking, Car Glove-box).


12) Switch Size, Type, and location (choose all that apply):

____I don't know.
____Other, please specify - prefer no twists.


13) User Interface (UI) and mode selection. Select all that apply.

____I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
____I want multiple light levels. (Some lights have 5-16 light levels.)


14)Material/Finish/Coating

____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today's higher end flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).

15) Water resistance
____None needed

16) Storage conditions
____In house (temperature/climate controlled environment)
____Emergency kit (long standby periods)



Thanks!
 
Top