Beacon of Light
Flashlight Enthusiast
- Joined
- Dec 9, 2005
- Messages
- 2,054
Not sure if it is in the pill or something more serious. It's a Peak HA Logan QTC which I am pretty sure is a medium as it has the frosted lens with the little micro dots. Anyways one night I had this on very low and kept it running over night and next morning it was off. I replaced the battery and nothing, no flicker no poof, no nothing. I just took the pill and donut out and there is a little black rubber cap with a nipple that fits in the hole in the bottom center where a negative contact screw would be if it was a non QTC model. I got the QTC pill apart and everything looked ok and the QTC was still in the middle little recessed area. Not sure if it matters which way the metal discs go back together but I put them together with both metal disks with the tiny center spike both facing inward toward the QTC (with the hole cut out of the center). If this is correct and the light does nothing with a fresh battery is there anything else to consider trying before sending it in to Bob or Curt? Just seems strange it was working flawlessly and then just out of nowhere it fails to work at all. I hope I can get it to work again as this one the QTC ramped perfectly a lot better than the Brass QTC Logan I had.
Last edited: