Post your flashlight glow-mod pics:

[BigBluefish]

I think this could be a real popular item, EG, if offered as a coating service. Might also be a nice option for coating slippery knife scales.

 

[CKOD]

Old thread, but I'll throw in my pic anyway...

2x fivemega dualbored bodies.

 

[sunny_nites]

This is a Brynite AAA 5 mode light.

I put a couple of coats of white automobile paint on the tail cap and a couple coats of Glow Incs V10 water based paint on top of that.

Glows really well.

 

[ToyTank]

Wow there are some SWEET mods here. I want MR. HYDE! I may have to post in bugsy's thread and see if we can get a run of those.

Here's my first glow mods besides the glow-rings. I think they turned out out ok. I really like the G2. L2Ms used Norland 61. I ran out and used the Crystal Clear Devcon 30 minute. I really prefer the norlands it's thinner more syringe friendly you can set it instantly if you have a 365nm flashlight.

More of the G2. It makes me feel warm and fuzzy now. This was the devcon epoxy, I got impatient and started another section before one totally cured... anyway it was a bit messy next one will be norland and much cleaner.

I'm not sure if I'll sand down the G2 to take the glow off the raised areas. It looks fine like it is though IMHO.

 

[pinkpanda3310]

Don't know why I couldn't find this thread?? I posted these pics in the homemade/custom section- http://www.candlepowerforums.com/vb/showthread.php?343902-Some-glow-on-DW-triple-xml but I think it should be here.

 

[trout]

here is a little lamp of mine glowing

 

[Thr3Evo]

Time to revive this thread.

 

[pinkpanda3310]

Been playing around with airbrush and auto paint

 

[stanmog]

Mac's Tri-EDC

 

[jaycyu]

Pimped out BriteStrike Quick-Detach holster


The back is no exception.


Compatibility is acceptable.

 

[jaycyu]

Long thin pin + sawed-off syringe + 2mm Jewlry Tube + Kosmic kreations powder = GitD o-rings
The unmodded syringe is superior than applying the paint using a small screw driver, when filling depressions.