DM51
Flashaholic
I have missed some of this discussion, so please forgive me if this has been mentioned before. My point concerns some 18650 cells apparently not fitting into the SC600. I have no first-hand experience, but it could be that the light was designed with unprotected cells in mind.
Unprotected cells are ~2mm shorter than protected ones, and (importantly) they are also thinner too, as they don't have the conducting strip running along the length of the cell. Unprotected cells are therefore more likely to fit; but the use of unprotected cells is NOT recommended for any application that doesn't have built-in low-voltage cut-off protection.
Unprotected cells are ~2mm shorter than protected ones, and (importantly) they are also thinner too, as they don't have the conducting strip running along the length of the cell. Unprotected cells are therefore more likely to fit; but the use of unprotected cells is NOT recommended for any application that doesn't have built-in low-voltage cut-off protection.