write2dgray
Enlightened
Another 5 minutes legoing and I discovered that when the Lumintop Ti Tool tail is used on a Maratac Cu or Lumintop Copper Tool with a 10440, it limits to one high mode - so the e-tail from the Lumintop Ti Tool is the culprit. If a Maratac Cu or Lumintop Copper Tool tail is used on the Lumintop Ti Tool body with a 10440, you get all three (brighter) modes :thumbsup:.
Here's a quick lego photo:
Cheers,
David
Here's a quick lego photo:
Cheers,
David