●-●-● ArcLS HAIII CR2Twist'R *2nd Run ?* ●-●-● [NOW SELLING !!]
EDIT 24/02/2007: SALE THREAD HERE !
First Run here.
Oke, I guess all that spammin' might be paying off....
The best I can do is another (Limited) Run of these CR2 tubes.
Limited meaning 48 units ONLY.
The reason I don't go for 100++++ units is to keep this a
hard-to-get part, and so far, it's quite hard 2 get.
But I do think enough interest was expressed that I might be considering
an additional run. If you are interested, POST IN THIS THREAD.
I will make a list of those who will have priority based on my PM-records
that I have saved (and is keeping my PM-box full at 98 all the time)
and the posts of those from the First Run thread. Here.
Please DO NOT post THERE.
I need all (48)orderes to be filled before I continue and may ask for
a (pre) payment. In any case don't get your hopes up too much.
Based on experience, I have set a firm price of US$55 shipped
everywhere. Standard shipping. Will not be held accountable for loss.
Upgrade for shipping will be available.
The part has not changed in design, so I will copy/paste all
info from the First Run here:
- SINGLE run of ONLY 48 CR2 Tubes, made from Grade 6061 Solid Alu Rods...
- These CR2 Tubes WILL BE numbered. (from 45 up.)
- When finished, the outer diameter (OD) of the CR2Tube will measure (about) 24,2mm on the knurls...
(Same as LS2 and later tubes, first run tubes were 25mm)
- Outside finish is HAIII natural.
From annodizer: "The color of the final anodizing depends on the alloy of aluminum used, the voltage through the chem bath, the solution of chem used, etc... It difficult to say how well they will match... ...It's a slightly greenish-grey color. More grey than green."
Threads and inner-tube are BARE ALU, not Chemkoted....
note: Tubes are manufactured in South America.
HAIII and shipping to their final destination will be from USA.
Shipping from S-Am to USA will be billed accordingly per tube.
- 1 O-ring will be included for every CR2Tube (but not fitted).
- 1 0,292" split ring will be included with every CR2Tube (but not fitted).
(This I will include FREE of charge, because I've made this version to allow a ring to be fitted and it would encourage more EDC on straps...)
- Estimated time it will take to appear on your doorstep: 4-6 weeks...
- Due to overwhelming demand, prices for shipping will be adjusted accordingly. (annodizing is done in USA)
- This is a custom job, and for factories that make 1000+units of a product, 1 run of 48tubes is not a cheap job. Expect to pay 100% of the manufacturing/shipping/misc. costs...
- Before you purchase this light, a breakdown of all costs will be placed in this thread.
- Payment method preferred: Paypal.....
Best regards, Bombelman.
EDIT 24/02/2007: SALE THREAD HERE !
First Run here.
Oke, I guess all that spammin' might be paying off....
The best I can do is another (Limited) Run of these CR2 tubes.
Limited meaning 48 units ONLY.
The reason I don't go for 100++++ units is to keep this a
hard-to-get part, and so far, it's quite hard 2 get.
But I do think enough interest was expressed that I might be considering
an additional run. If you are interested, POST IN THIS THREAD.
I will make a list of those who will have priority based on my PM-records
that I have saved (and is keeping my PM-box full at 98 all the time)
and the posts of those from the First Run thread. Here.
Please DO NOT post THERE.
I need all (48)orderes to be filled before I continue and may ask for
a (pre) payment. In any case don't get your hopes up too much.
Based on experience, I have set a firm price of US$55 shipped
everywhere. Standard shipping. Will not be held accountable for loss.
Upgrade for shipping will be available.
The part has not changed in design, so I will copy/paste all
info from the First Run here:
- SINGLE run of ONLY 48 CR2 Tubes, made from Grade 6061 Solid Alu Rods...
- These CR2 Tubes WILL BE numbered. (from 45 up.)
- When finished, the outer diameter (OD) of the CR2Tube will measure (about) 24,2mm on the knurls...
(Same as LS2 and later tubes, first run tubes were 25mm)
- Outside finish is HAIII natural.
From annodizer: "The color of the final anodizing depends on the alloy of aluminum used, the voltage through the chem bath, the solution of chem used, etc... It difficult to say how well they will match... ...It's a slightly greenish-grey color. More grey than green."
Threads and inner-tube are BARE ALU, not Chemkoted....
note: Tubes are manufactured in South America.
HAIII and shipping to their final destination will be from USA.
Shipping from S-Am to USA will be billed accordingly per tube.
- 1 O-ring will be included for every CR2Tube (but not fitted).
- 1 0,292" split ring will be included with every CR2Tube (but not fitted).
(This I will include FREE of charge, because I've made this version to allow a ring to be fitted and it would encourage more EDC on straps...)
- Estimated time it will take to appear on your doorstep: 4-6 weeks...
- Due to overwhelming demand, prices for shipping will be adjusted accordingly. (annodizing is done in USA)
- This is a custom job, and for factories that make 1000+units of a product, 1 run of 48tubes is not a cheap job. Expect to pay 100% of the manufacturing/shipping/misc. costs...
- Before you purchase this light, a breakdown of all costs will be placed in this thread.
- Payment method preferred: Paypal.....
Best regards, Bombelman.
Last edited:
I thought it was for the whole light. In that case I'm out. Thanks though.
