• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 1x18650 & 2x18650 D36 Host by FiveMega

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,601
Location
California
(NOT AVAILABLE)


Please allow 7 days to ship


Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.



IMG_0168.jpg




Please read completely before you post or buy then pay and post.


Absolutely NO reservation.


Hi folks, Here I have some new toys for you.
These bodies are similar to these but with single 18650 or 2x18650 tube. D36 module and batteries are (NOT INCLUDED).
Bodies are designed to accomodate 18mm protected cells and tail side of body is $urefire "C" tail compatible.
All bodies, tail caps and bezels are black hard anodized and no other color available.
These are complete host including one piece head/body, bezel, tail cap, McClickie switch, switch boot, Borofloat high temp glass and all needed o'rings which make it very reliable water resistance but not submersable.
Picture shows 2x18650 version on top/left, tail side of 2x18650 in middle and 1x18650 body on bottom/right.
Pentagon shape tail caps with installed McClicky is included.
Switch boot is easy to operate with one hand and choice of black, orange or green GID
Head and body are machined from one piece of high grade aluminum bar and has lots of fine and deep grooves to manage better heat dissipation which is more critical with extreme hot LEDs such as SST-50, SST-90, XML or extreme hot WA1111
Will take many different D36 lamp assemblies such as this, this, FM-D36 socket/reflector module or any other drop in D36 lamp/LED modules.
I strongly suggest these for single 18650 or FM-D36 socket/reflector+1111 module (880 Lumens) for 2x18650 version.
3x26500 D36 bodies are available here.
And
D26 bodies are available here.
Possibilities are endless.
I use STT-90 drop in with 1x18650 and never seen such a light from this small package. Thanks Dave. 👍


Advantages:
Not only you will get long run time compare to 17mm cells but brighter output because of less voltage sag, less stress to cells and less frequent recharge.
Body thickness is about 26mm which is about same as original 9P but head is larger. Tail cap is designed to stop slipping out of hand and anti roll.
What you get is a complete host including body, tail cap, switch, tail cap boot, tail cap ring, bezel, lens and all needed o'rings. Head and body is made of one piece (nonremoveable) high grade aluminum for better heat sinking. No lamp assembly, and No batteries or chargers included. Also available without tail cap for reduced price.
*These bodies are designed to take several different types of D36 modules but you may need to extract short spring of some modules.*
Price:
Black 1x18650 with tail cap $77 COLOR] $77 (BLEMISHED) (NOT AVAILABLE)
Black 2x18650 with tail cap $88 (NOT AVAILABLE)
---
Black 1x18650 without tail cap $47 (BLEMISHED) (NOT AVAILABLE)
Black 2x18650 without tail cap $58 (NOT AVAILABLE)
Incand D36 socket/reflector (G4) without bulb $40 (MAY OR MAY NOT WORK WITH OTHER HOSTS)
Extra black boot (switch cover) $1 (AVAILABLE) with purchase of body.
Extra orange boot (switch cover) $1 (AVAILABLE) with purchase of body.
Extra GID boot (switch cover) $1 (AVAILABLE) with purchase of body.
Shipping to States $6 (any quantity)
Internationaly $14 each
Please add 4% to total for CC paypal fee.


No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind. There will not be any refund.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY[/SIZE] to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Example:
Mr Gonzafire :paypal: for #76 1x18650 with black boot
Paypal: DO NOT PAY
Please PM for postal money order payment.
Tail caps are available here.
Please see:

Bored out Original 6P

Modified Genuine 6P

C2 like 18650 host

Copper C Tail Cap

Copper C Head

Copper (Ver.2) Ultra Cool 6P

Copper (Ver.3) Ultra Cool Copper 6P

RedFire

$urefire 1x16340 & 2x16340 "C" head

2AA & 3AA D26

18650 E bodies

Any comment welcome.
www.USPS.com
-----------------------

#01 D36 1x18650 $57 donn_ paid shipped 03092880000110377085
#02 D36 1x18650 $57 donn_ paid shipped 03092880000110377085
#03 D36 1x18650 $87 nailbender paid shipped 03092880000110377092
#04 D36 1x18650 $57 purelite paid shipped 03090330000023806128
#05 D36 1x18650 $87 RedfishBluefish paid shipped 03092880000110424710
#06 D36 1x18650 $87 OneBigDay paid shipped 03092880000110424741
#07 D36 1x18650 $57 purelite paid shipped 03092880000110383024
#08 D36 1x18650 $87 ^^Nova^^ paid shipped LC547810906US
#09 D36 1x18650 $86 flashfiend paid shipped 03101230000057970929
#10 D36 1x18650 $87 m@tty paid shipped LC547811124US
#11 D36 1x18650 $87 rookie paid shipped 03092880000110388104
#12 D36 1x18650 $87 rookie paid shipped 03092880000110388104
#14 D36 1x18650 $57 Kif paid shipped 23101590000030166953
#15 D36 1x18650 $87 xml paid shipped 03122120000184837361
#16 D36 1x18650 $57 gVp paid shipped LC564219234US
#17 D36 1x18650 $87 Epsilon paid shipped LC844046538US
#18 D36 1x18650 $87 editedby paid shipped 23082180000039961527
#19 D36 1x18650 $57 Jvvjvv paid shipped 9505513808435235018328

----------------------
#01 D36 1x18650 $77 (BLEMISHED) Grahambo0101 paid shipped 9505511144965124568973
#02 D36 1x18650 $47 (BLEMISHED) yellow paid shipped LA046552963US
#03 D36 1x18650 $47 (BLEMISHED) ErikP paid shipped 9500113808438320185555
#04 D36 1x18650 $47 (BLEMISHED) nmiller paid shipped 9500113808419158223138


-----------------------
#01 D36 2x18650 $88 nailbender paid shipped 03092880000110377092
#02 D36 2x18650 $88 RedfishBluefish paid shipped 03092880000110424710
#03 D36 2x18650 $88 lctorana paid shipped LC547817541US
#04 D36 2x18650 $58 Jvvjvv paid shipped 9505513808435235018328
#05 D36 2x18650 $88 Coyote302 paid shipped 9505513808430287340544

-----------------------
Please find link of my other products here and click on each link you are interested on.
-----------------------

(NOT AVAILABLE)
 
Last edited:
:paypal:
#55 1x26650 $63
#8 2x26650 $73
D36 Host w/tailcap
#5 1x18650 GID $87
#2 2x18650 GID $98
Shipping $6
Total $327.00
 
Last edited:
So they are!:party::takeit:

:paypal: for

#03 D36 2x18650 without tail cap $68
#01 Black Round McClicky $urefire "C" Tail Cap $35
International Shipping $10
Total $113
 
Mine arrived today, and they are fantastic! I didn't think anything could beat the 1x26650 D36, but these may just do it. They have the same great gription from the knurling and the ability to use a variety of tailcaps.

IMGP3387.jpg


Another great product, Varooj!

:thanks:

Now all I need are a couple of A19 clones, with the same knurling, so I can run with 2x 18500s.:devil:
 
Last edited:
Do you usually send shipping notification Varooj?

Havnt heard/seen anything yet and just curious .


oh, and what do you think about an a19 style extender for these bodies ? any chance?

Thanx for your time
 
Hi Buddy

I have to admit you have another hit, I have used the 1X18650 the last two mornings and really like the lightness and feel of the host. Fits the hand well and after using the 1X26650 it seems like it is lite as feather.

I agree with Donn a real hit

thanks

Dave
 

Latest posts

Top