Sabrewolf
Flashlight Enthusiast
"All Edc's Completed" Mini P7 EDC 123 Keychain-Light Groupbuy? C/W-P7 And W/W-MC-E
The New Sales Thread can be found Here:
https://www.candlepowerforums.com/threads/216539
All Edc's are Completed and ready to ship out!
If you haven't paid allready, Please shoot me a
Message when you do so i can note it on the list.
I will be shipping the Paid ones out today
Here is a pic to drool over
Here are "Some" of my parts and stuffs sitting next to "Your"
Edc's See you names on the bags? Thats You! 
I am finishing these little guys up this weekend, and start
shipping them out on monday So send in your Payments 
:thumbsup:
I will start another Thread for a 20pcs sale.
You can post in there when the time comes.
I will be taking deposits for the next batch though,
Because my expendable income is going towards
making the Chimera Mini and its bigger brother.
Parts Are Here!!! 12/6/08
Just to let all of you know..
I am still waiting on my parts to arrive.
Of course i am dealing with Deal Extreme here,
So all of you know that it takes awhile sometimes
I "Should" Be receiving the parts by the first week
of December :mecry: I understand if some of you would
want to jump ship on this sale.. I won't have a problem
with it. Just PM me and let me know. But if you can be
patient, I will have these in your hands soon!
Hello CPF'ers
This thread is replacing the older one that a Cpf
member bought the "First" light from.
This is a groupbuy that will continue as long
as interest is there. I will probably keep a few
on hand most of the time, So PM me for Availabilty.
It is an MCU-C7 from DX that has an
MC-E Warmwhite Led Or a Cool White DSXPJ P7
Stuffed Inside. The Drive current is about
1300mA on high. Battery Current draw is 1400mA.
On a 0.4% output, which can be reached in the
3rd Programming Group, The Battery drain
on that is around 70mA, With about 50mA to the Led.
The driver has 5 modes arranged in 5 groups of
different configurations. Instructions are below.
Heat output on high is tolerable in your hand for
extended periods of time. The ceiling bounce was
done on low because extended times over 5 min
need a hand to dissapate heat. If you run the light
continuously with proper heat management,
Runtime will be about 20 minutes on High :candle:
The driver board can run from 0.9v-4.5v.
So make sure you use protected batteries if you don't
know how to tell when they are near the 2.5v deadline.
You can use Primaries and 3.0v Rechargables too :twothumbs
Now for some Glamour Shots:
^^10% Low Mode^^
^^10% Low Mode^^
The Prices and Options are as follows:
$95.00 For the Basic P7 Edc
$15.00 Add "Glow" to the tailcap> See Last Pic Above
The Glow "Cannot" be turned off due to lack of space
for a switch, and anodizing on the tailcap threads.
$5.00 Set of 2 CR123 880mA Ultrafire Protected Batts
$10.00 Trustfire Lithium CR123-18650 Charger
Keychain Clips are free, but i only have a limited number
of them They are permanently installed, but can
be removed with a set of tin-snips or diagonal cutters.
See the tailcap glow pic for a quick shot of the clip.
Conus Shipping is included on the Basic Edc purchase,
But will be extra for any additional items except for
adding just the batteries. The charger has a US Plug,
and can be swapped to a UK or similar by just pulling
out the US cord.
The "Pill" that houses the P7 and Driver has a thick
coating of Conductive Carbon-Infused Silicone Grease.
This helps with heat dissapation, and Power Connection.
Otherwise the Front, And Rear Tailcap/O-Rings have
regular Silicone Grease for lubrication. As do "All" of
my lights sold :naughty:
Everyone interested, please let me know so that i can
order the parts.. The leadtime is 2 weeks from the parts
order being placed. Deadline is Friday for a large order.
I have allready got numbers 1-10 covered for my order
this monday :thumbsup:
I will accept paypal payments now, But if you want to
wait till i get the parts and assemble the lights, that
is just fine with me :wave:
Paypal Addy: [email protected]
Orders over 100.00,please add the 4% fee
Sorry i forgot to add that in the beginning
Disreguard the Above Statement :thinking:
If you are buying just the Edc, and are in the
Conus Area, Don't worry about adding Fees :nana:
^^Disreguard the above statement ^^
If you want to buy Just the Edc Itself, There are NO
Extra fees even if you are using paypal Credit Cart Payment.
And there are No Shipping charges if Buying the Edc with Just the
Batteries and/or Glow.
If you want the Charger, Please Add 1.00 for shipping.
If the Order Totals 101.00 or more and you are using
A Credit Card with Paypal, please add the 4%
Debit Card/Bank Account Paypal, No Fees whatsoever if
shipped Conus.
By the way, for those that don't know, Conus = Continental U.S.
Also, You have a Choice of a Cool White P7 or a
Warm White MC-E Led.. Price stays the same..
Orders so far:
#
1 Black Bolt P7 Cool White w/glowcap Completed Shipped 12/17/08 Received 12/22/08
2 Joshvon MC-E 2.8ah 2-Mode Clicky Paid Completed Shipped 12/19/08 Received 12/22/08
3 Gary123 Warmwhite MC-E, Set of Batts Paid Completed Shipped 12/16/08 Received 12/18/08
4 Mcmc Warmwhite MC-E Paid Completed Shipped 12/16/08 Received 12/22/08
5 Bxstylez Warmwhite MC-E 2.8ah Direct Drive Completed Sold to Black Bolt (BXstylez did not return Pm's) Received 12/29/08
6 Hawkz Warmwhite MC-E, Glow, Batts, Keyclip Paid Completed Shipped 12/15/08 Received 12/18/08
7 Johnnymceldoo P7 Coolwhite Paid Completed Shipped 12/15/08 Received 12/17/08
8 Hamheart P7 Coolwhite With Glow Paid Completed Shipped 12/16/08 Received 12/20/08
9 Chew Socks Christmas Givaway Winner Warmwhite MC-E Gifted Completed Shipped 12/16/08 Received 12/18/08
10 Nfetterly MC-E Warmwhite, Glow, 2 Batts, Clippie Paid Completed Shipped 12/15/08 Received 12/17/08
Order Placed Nov 5th for 10 lights worth of parts
Should be less than 2 weeks for them to arrive,
and me to modify them to sell
The New Sales Thread can be found Here:
https://www.candlepowerforums.com/threads/216539
All Edc's are Completed and ready to ship out!
If you haven't paid allready, Please shoot me a
Message when you do so i can note it on the list.
I will be shipping the Paid ones out today
Here is a pic to drool over
Here are "Some" of my parts and stuffs sitting next to "Your"
Edc's
See you names on the bags? Thats You! I am finishing these little guys up this weekend, and start
shipping them out on monday
So send in your Payments :thumbsup:
I will start another Thread for a 20pcs sale.
You can post in there when the time comes.
I will be taking deposits for the next batch though,
Because my expendable income is going towards
making the Chimera Mini and its bigger brother.
Parts Are Here!!! 12/6/08
Just to let all of you know..
I am still waiting on my parts to arrive.
Of course i am dealing with Deal Extreme here,
So all of you know that it takes awhile sometimes
I "Should" Be receiving the parts by the first week
of December :mecry: I understand if some of you would
want to jump ship on this sale.. I won't have a problem
with it. Just PM me and let me know. But if you can be
patient, I will have these in your hands soon!
Hello CPF'ers
This thread is replacing the older one that a Cpf
member bought the "First" light from.
This is a groupbuy that will continue as long
as interest is there. I will probably keep a few
on hand most of the time, So PM me for Availabilty.
It is an MCU-C7 from DX that has an
MC-E Warmwhite Led Or a Cool White DSXPJ P7
Stuffed Inside. The Drive current is about
1300mA on high. Battery Current draw is 1400mA.
On a 0.4% output, which can be reached in the
3rd Programming Group, The Battery drain
on that is around 70mA, With about 50mA to the Led.
The driver has 5 modes arranged in 5 groups of
different configurations. Instructions are below.
Heat output on high is tolerable in your hand for
extended periods of time. The ceiling bounce was
done on low because extended times over 5 min
need a hand to dissapate heat. If you run the light
continuously with proper heat management,
Runtime will be about 20 minutes on High :candle:
The driver board can run from 0.9v-4.5v.
So make sure you use protected batteries if you don't
know how to tell when they are near the 2.5v deadline.
You can use Primaries and 3.0v Rechargables too :twothumbs
Now for some Glamour Shots:
^^10% Low Mode^^
^^10% Low Mode^^
The Prices and Options are as follows:
$95.00 For the Basic P7 Edc
$15.00 Add "Glow" to the tailcap> See Last Pic Above
The Glow "Cannot" be turned off due to lack of space
for a switch, and anodizing on the tailcap threads.
$5.00 Set of 2 CR123 880mA Ultrafire Protected Batts
$10.00 Trustfire Lithium CR123-18650 Charger
Keychain Clips are free, but i only have a limited number
of them
They are permanently installed, but canbe removed with a set of tin-snips or diagonal cutters.
See the tailcap glow pic for a quick shot of the clip.
Conus Shipping is included on the Basic Edc purchase,
But will be extra for any additional items except for
adding just the batteries. The charger has a US Plug,
and can be swapped to a UK or similar by just pulling
out the US cord.
The "Pill" that houses the P7 and Driver has a thick
coating of Conductive Carbon-Infused Silicone Grease.
This helps with heat dissapation, and Power Connection.
Otherwise the Front, And Rear Tailcap/O-Rings have
regular Silicone Grease for lubrication. As do "All" of
my lights sold :naughty:
Everyone interested, please let me know so that i can
order the parts.. The leadtime is 2 weeks from the parts
order being placed. Deadline is Friday for a large order.
I have allready got numbers 1-10 covered for my order
this monday
:thumbsup:I will accept paypal payments now, But if you want to
wait till i get the parts and assemble the lights, that
is just fine with me :wave:
Paypal Addy: [email protected]
Orders over 100.00,please add the 4% fee
Sorry i forgot to add that in the beginning
Disreguard the Above Statement :thinking:
If you are buying just the Edc, and are in the
Conus Area, Don't worry about adding Fees :nana:
^^Disreguard the above statement ^^
If you want to buy Just the Edc Itself, There are NO
Extra fees even if you are using paypal Credit Cart Payment.
And there are No Shipping charges if Buying the Edc with Just the
Batteries and/or Glow.
If you want the Charger, Please Add 1.00 for shipping.
If the Order Totals 101.00 or more and you are using
A Credit Card with Paypal, please add the 4%
Debit Card/Bank Account Paypal, No Fees whatsoever if
shipped Conus.
By the way, for those that don't know, Conus = Continental U.S.
Also, You have a Choice of a Cool White P7 or a
Warm White MC-E Led.. Price stays the same..
Orders so far:
#
1 Black Bolt P7 Cool White w/glowcap Completed Shipped 12/17/08 Received 12/22/08
2 Joshvon MC-E 2.8ah 2-Mode Clicky Paid Completed Shipped 12/19/08 Received 12/22/08
3 Gary123 Warmwhite MC-E, Set of Batts Paid Completed Shipped 12/16/08 Received 12/18/08
4 Mcmc Warmwhite MC-E Paid Completed Shipped 12/16/08 Received 12/22/08
5 Bxstylez Warmwhite MC-E 2.8ah Direct Drive Completed Sold to Black Bolt (BXstylez did not return Pm's) Received 12/29/08
6 Hawkz Warmwhite MC-E, Glow, Batts, Keyclip Paid Completed Shipped 12/15/08 Received 12/18/08
7 Johnnymceldoo P7 Coolwhite Paid Completed Shipped 12/15/08 Received 12/17/08
8 Hamheart P7 Coolwhite With Glow Paid Completed Shipped 12/16/08 Received 12/20/08
9 Chew Socks Christmas Givaway Winner Warmwhite MC-E Gifted
Completed Shipped 12/16/08 Received 12/18/0810 Nfetterly MC-E Warmwhite, Glow, 2 Batts, Clippie Paid Completed Shipped 12/15/08 Received 12/17/08
Order Placed Nov 5th for 10 lights worth of parts
Should be less than 2 weeks for them to arrive,
and me to modify them to sell
Last edited:
