Raptor-3 using Luminus SST-90

[nanotech17]

can anybody confirm it?
it looks like JB M1X.

 

[Glenn7]

where did you hear/see that??

 

[jgraham15]

 

[nanotech17]

i'm in the office connected via a proxy so uploading a photo is prohibited :sick2:

 

[Glenn7]

i'm in the office connected via a proxy so uploading a photo is prohibited :sick2:

send me a link by PM?

 

[nanotech17]

send me a link by PM?

PM sent

 

[brighterisbetter]

send me a link by PM?

+1 for me please

 

[Glenn7]

If they are going to use a SST-90 they must not be driving it hard because it would fry it self in a light that size - I have a SST-90 emitter and they are really hot and need a really big heat sink - also IMO this light will be a WOF because of the small reflector and big light source.

.

 

[TAIGERSX]

 

[Glenn7]

you like me are terminal

 

[DimeRazorback]

Wow!

That looks interesting to me!

Where is this information from??

 

[richardcpf]

+1

3x18650 or 2x18650 body please

 

[DimeRazorback]

According to megatorch it will be a 3x 18650 in parallel config.

 

[bigchelis]

I just got a PM from one of the custom builders here regarding these SST-90 LED's.

On direct drive in a 1D Mag hosts and the best heatsinking possible he got up to 9A of current.....with a single cell IMR 18650:twothumbs:twothumbs


He said the solder melted and the LED came off Now, that is hot, hot, hot, hot, hot,...He is trying to find a solder that will not melt at such high temperatures and a way to keep the current at 5A stable or 9A without melting the solder.

Did I mention the turn-on lumens are over 1400 as measured in a MrGman built and calibrated IS Sphere


bigchels

 

[GoingGear.com]

WOW, that looks amazing. Jetbeam is really knocking it out of the park these days.

 

[berry580]

wow!! really looking forward to that!

 

[I came to the light...]

I wonder, is the 1000 lumen rating bulb or torch? If it is bulb, they aren't adding much over the M1X.

 

[easilyled]

I wonder, is the 1000 lumen rating bulb or torch? If it is bulb, they aren't adding much over the M1X.

They quoted 400 OTF or 700 led lumens for the M1-X, so if its an OTF rating, its adding 600 lumens. If its emitter ratings, its adding 300 lumens.

That's not too shabby either way!

 

[Patriot]

Go JetBeam! :twothumbs

 

[276]

I was just about to go to sleep and that photo just woke me up!