-1D Size Host
-3x17670 Powered via FiveMega's battery holder (Included)
-Custom Anodized Heatsink (Same as the Sceptre)
-6x Cree Q3 5A Led's (Warm Tint)
-MaxFlex Driver (Potted to Heatsink)
-6x MCR-17XR Aluminum Reflectors
This is a wonderfull light with excellent warm tint. The Cree XR-E 5A's are my currently favorite LED every other LED looks purple / Blue compared to them. The MaxFlex is currently set to the 1000ma table with 5 regulated Brightness levels. I built this light for myself a while back but it has seen ZERO use. The Q3 are rated at around 200 lumens at 1amp. Light draws 2 amps on level 5 which would give around 45 minutes of runtime. On the lower levels which are PLENTY bright you would have HOURS of runtime. Runtime should be similar to below.
Level 1 0.045ma Runtime 35.5 hours
Level 2 0.463ma Runtime 3.45 hours
Level 3 0.770ma Runtime 2 hours
Level 4 1.27 amps Runtime 1.25 hours
Level 5 2.10 amps Runtime 45 minutes
$380 Delivered (US)
-3x17670 Powered via FiveMega's battery holder (Included)
-Custom Anodized Heatsink (Same as the Sceptre)
-6x Cree Q3 5A Led's (Warm Tint)
-MaxFlex Driver (Potted to Heatsink)
-6x MCR-17XR Aluminum Reflectors
This is a wonderfull light with excellent warm tint. The Cree XR-E 5A's are my currently favorite LED every other LED looks purple / Blue compared to them. The MaxFlex is currently set to the 1000ma table with 5 regulated Brightness levels. I built this light for myself a while back but it has seen ZERO use. The Q3 are rated at around 200 lumens at 1amp. Light draws 2 amps on level 5 which would give around 45 minutes of runtime. On the lower levels which are PLENTY bright you would have HOURS of runtime. Runtime should be similar to below.
Level 1 0.045ma Runtime 35.5 hours
Level 2 0.463ma Runtime 3.45 hours
Level 3 0.770ma Runtime 2 hours
Level 4 1.27 amps Runtime 1.25 hours
Level 5 2.10 amps Runtime 45 minutes
$380 Delivered (US)
Last edited:
oo:
