Aleph 1 aftermarket bezel

[sithjedi333]

Hey all,

I have an Aleph 1 and want to put on a bezel that's more protective than the stock ring, and was wondering what my options are. I know RPM sells a very nice Ti bezel but I don't want to spend $50+, more like $15 or so. I saw the Mofobezel on Lighthound but wasn't sure if it were too thick for the Aleph. Are the Solarforce 6P/G2 size bezels compatible? Any others I should consider? Ideally I would like something short and mildly crenelated.

Thanks!

 

[fyrstormer]

RPM's bezels are worth the money, but if you're determined to go the cheap route you can get this one from the Sandwich Shoppe: http://theledguy.chainreactionweb.com/product_info.php?cPath=48_55&products_id=887

That being said, here are some pictures of my McGizmonster with an RPM bezel installed. I would do it again without a second thought:

 

[jch79]

You might be able to bother TranquillityBase to get a bezel made too. Scott's bezels are sexxxy. :d
:thumbsup: john

 

[run4jc]

RPM's bezels are worth the money, but if you're determined to go the cheap route you can get this one from the Sandwich Shoppe: http://theledguy.chainreactionweb.com/product_info.php?cPath=48_55&products_id=887

That being said, here are some pictures of my McGizmonster with an RPM bezel installed. I would do it again without a second thought:

This is one of the coolest lights I have seen in a long time...so simple, yet so perfect!

:twothumbs:twothumbs

 

[Raoul_Duke]

This is one of the coolest lights I have seen in a long time :twothumbs:twothumbs

I agree! and happily I have the same, I bought it at the same time as fyrstormer...Well mine is near enough the same, Mine has no engraved clip, and the shoppe Ti bezzle.

Originaly I had the PR head, and put on the Aleph head, but still thought the PR head was the best setup, but after adding the Ti bezzle the Aleph 1 head realy crowns the 1 cell McLux body.

The Bezzle makes a big difference.

 

[sithjedi333]

Thanks for the suggestions everyone. They look great!

 

[Scottiver]

I have the Sandwich Shoppe bezel ring on my aleph 1. It's pretty nice although I thought the crenelations were a little sharp so I took a random orbital sander to it and shaved about 1/16" or so off and like it much better.