cgpeanut
Enlightened
I have the last 10 brand new Latetest POP2 Version 2.25 sammies with TYAH single TPS73601 LDO that runs @600mA Max.
These are the LAST 10 POP2 Version 2.25 sammies I have and quite possibly the last ones that will ever be made.
First to post "I'll take it" here, takes presidence over pm's
$59.95 shipped anywhere
paypal address: [email protected]
Runtime on these are less than 2 mins just enough to test all the functions.
These sammies have the same dimensions as the regular sammies the shoppe sells, They work with 14500, 1-AA rechargeable, R123 li-ons with output voltage of 3.7 volts as well as regular CR123 lithium batteries or 2-AA NiMH or 2-AA Alkalines because the TYAH lux has a low input voltage Vf of 3.00 volts
These Sammies will work with the Firefly 2, CNC123 and Minimag bodies.
You can easily EDC a FF2 and with the features of the POP2 software the combo will be hard to beat I think /ubbthreads/images/graemlins/cool.gif
POP2 + FF2
MiniMag and FF2 as hosts for POP2 sammie
POP2 Sammies-1
POP2 Sammies-2
POP2 Sammies-3
POP2 Sammies-4
POP2 Sammie with CNC123 as host
Glowing Sammie
For more info on what the POP2 is all about please check this thread posted by DJPark.
POP2 (PIC-O-PWM V2) with PICmicro Dual UI
Features
- LDO based constant current regulation with li-ion battery
- Dual selectable UI (traditional and simpler version)
- 7Hz Strobe mode (instead of previous 5Hz).
- Easy access to the default high and low brightness mode
- Last brightness level used is remembered when turned on next time
- Modified SOS mode (shorter pause between characters)
- survival mode with minimum current flow and lowest brightness for really long run time
- User selectable low mode brightness level
- optional burst mode for short duration brihter light output
- Provision for future firmware upgrade without replacing the controller IC
OPERATION:
1st ON = default level (low)
2nd ON = alternate level
3rd ON = low level brightness selection
4th ON = strobe mode
5th ON = sos mode
These are the LAST 10 POP2 Version 2.25 sammies I have and quite possibly the last ones that will ever be made.
First to post "I'll take it" here, takes presidence over pm's
$59.95 shipped anywhere
paypal address: [email protected]
Runtime on these are less than 2 mins just enough to test all the functions.
These sammies have the same dimensions as the regular sammies the shoppe sells, They work with 14500, 1-AA rechargeable, R123 li-ons with output voltage of 3.7 volts as well as regular CR123 lithium batteries or 2-AA NiMH or 2-AA Alkalines because the TYAH lux has a low input voltage Vf of 3.00 volts
These Sammies will work with the Firefly 2, CNC123 and Minimag bodies.
You can easily EDC a FF2 and with the features of the POP2 software the combo will be hard to beat I think /ubbthreads/images/graemlins/cool.gif
POP2 + FF2
MiniMag and FF2 as hosts for POP2 sammie
POP2 Sammies-1
POP2 Sammies-2
POP2 Sammies-3
POP2 Sammies-4
POP2 Sammie with CNC123 as host
Glowing Sammie
For more info on what the POP2 is all about please check this thread posted by DJPark.
POP2 (PIC-O-PWM V2) with PICmicro Dual UI
Features
- LDO based constant current regulation with li-ion battery
- Dual selectable UI (traditional and simpler version)
- 7Hz Strobe mode (instead of previous 5Hz).
- Easy access to the default high and low brightness mode
- Last brightness level used is remembered when turned on next time
- Modified SOS mode (shorter pause between characters)
- survival mode with minimum current flow and lowest brightness for really long run time
- User selectable low mode brightness level
- optional burst mode for short duration brihter light output
- Provision for future firmware upgrade without replacing the controller IC
OPERATION:
1st ON = default level (low)
2nd ON = alternate level
3rd ON = low level brightness selection
4th ON = strobe mode
5th ON = sos mode