Another driver needed....

[ambientmind]

I'm looking for a driver that puts out 1200-1400mA @ 8.4V max input. Any ideas? Thanks!

 

[Sabrewolf]

I'm looking for a driver that puts out 1200-1400mA @ 8.4V max input. Any ideas? Thanks!

How many leds were you going to drive with it?
The Maxflex is a good choice:
http://www.taskled.com/maxflex.html
Or the others that George sells.
Keep in mind that there are others,
Its just that i have only bought from
him besides the dealextreme stuffs.
And the Maxflex will be used in my
Chimera Mini:
http://www.candlepowerforums.com/vb/showthread.php?t=212213

 

[romulus]

Ok, do you need brightness adjust? Is PWM ok? You say 8.4V max input, do you mean that you need 8.4V max at the load (LED)?

Also, what physical size?

 

[ambientmind]

Sorry, I should have been more specific. I'm looking for a single mode driver to power a P7 at around 1200-1400mA to get about 400lm out of it. It will be going into an M3, so it cant be too big, but there should be plenty of room in there for a normal sized driver. I dont need multiple modes, just on/off. I'll be using 2x17500 or 2x18500 batteries if I get the body bored out so the max input voltage will be 8.4V. Thanks!