Newuser01
Enlightened
Hello, Folks.
I'm new to moding lights. That said: I have posted a "asking for help" thread in the Homemade and Modified lights area with some questions.
Here, http://www.candlepowerforums.com/vb/showthread.php?t=154421
Make a long story short, Can anyone tell what type of circuit in this light?
I did the measurement on the switch and there is no resistance! DMM set on OHM, connected the test leads to COM and OHM, measured 00.00.
Measured at the tail cap, 0.57 A with DMM set to 10 ADC, with 2000 Mah Lenmar NImh cell (1.26V).
Measured at the tail cap, 0.99 A with DMM set to 10 ADC, with 1.5V Alk cell (1.57V).
Measured at the tail cap, 1.10 A with DMM set to 10 ADC, with 1.5V energizer E2 cell (1.58V), and dropping.
TIA.
I'm new to moding lights. That said: I have posted a "asking for help" thread in the Homemade and Modified lights area with some questions.
Here, http://www.candlepowerforums.com/vb/showthread.php?t=154421
Make a long story short, Can anyone tell what type of circuit in this light?
I did the measurement on the switch and there is no resistance! DMM set on OHM, connected the test leads to COM and OHM, measured 00.00.
Measured at the tail cap, 0.57 A with DMM set to 10 ADC, with 2000 Mah Lenmar NImh cell (1.26V).
Measured at the tail cap, 0.99 A with DMM set to 10 ADC, with 1.5V Alk cell (1.57V).
Measured at the tail cap, 1.10 A with DMM set to 10 ADC, with 1.5V energizer E2 cell (1.58V), and dropping.
TIA.
