Hi folks,
I've been taking stock of old lights/components in my inventory and there's a few E series in there:
Vital Gear FB2 Black body with an E2D head containing an LED multi-level tower (maybe Koala or Tana, can't remember). I'll probably keep this one as-is.
Vital Gear E2C black adapter
Vital Gear FB2 HA Nat body with Vital Gear SF P series compatible head and an old (XP-G iirc) drop-in
Vital Gear FB3 HA Nat body
TLS Cree Q5 1 cell HA Nat head
Ti VME head (from recent GB)
I'm keen to play lego with the above parts, happy to stick with primaries as the end results will probably be stashed at our second home (which can be susceptible to power cuts). I've been out of touch with the flashlight market for the past few years but old habits die hard….
Over and above any general suggestions recommendations from the good folks at CPF, I have some specific questions:
The O rings on the VG bodies are in a bad way. Can anybody recommend a source for replacements please?
The Ti VME head is a recent acquisition, could/should it be paired with an HA body or should I track down suitable Ti components to match? If so, any suggestions as to sources please?
I'm seriously considering pairing the FB3 body with the VG P series head and a Malkoff 9 series drop-in, would this work?
Could the TLS 1 cell head be updated with a modern LED (if possible to accept higher voltage as well)? Any recommended modders?
Apologies for the brain dump, it's as much for me to take stock as anyone else!
Cheers
Dave
I've been taking stock of old lights/components in my inventory and there's a few E series in there:
Vital Gear FB2 Black body with an E2D head containing an LED multi-level tower (maybe Koala or Tana, can't remember). I'll probably keep this one as-is.
Vital Gear E2C black adapter
Vital Gear FB2 HA Nat body with Vital Gear SF P series compatible head and an old (XP-G iirc) drop-in
Vital Gear FB3 HA Nat body
TLS Cree Q5 1 cell HA Nat head
Ti VME head (from recent GB)
I'm keen to play lego with the above parts, happy to stick with primaries as the end results will probably be stashed at our second home (which can be susceptible to power cuts). I've been out of touch with the flashlight market for the past few years but old habits die hard….
Over and above any general suggestions recommendations from the good folks at CPF, I have some specific questions:
The O rings on the VG bodies are in a bad way. Can anybody recommend a source for replacements please?
The Ti VME head is a recent acquisition, could/should it be paired with an HA body or should I track down suitable Ti components to match? If so, any suggestions as to sources please?
I'm seriously considering pairing the FB3 body with the VG P series head and a Malkoff 9 series drop-in, would this work?
Could the TLS 1 cell head be updated with a modern LED (if possible to accept higher voltage as well)? Any recommended modders?
Apologies for the brain dump, it's as much for me to take stock as anyone else!
Cheers
Dave