locea
Newly Enlightened
Hello everybody.
I have lots of beautiful and rare lights to sell.
A19 XR-E. HA finish. This light has a very nice beam and is very bright. Sold
Sceptre Dark Green Sold
*6x Cree Q5 Bin WC LED's
*1x Cree Red LED
*7x Mcr17XR Reflectors
*Custom Anodized Heatsink
*2-Stage resistored tailswitch
*UCL Lens
*Premium FiveMega battery holder for 6xR123 cells
Price List:
1.Sceptre $450 Sold
2.Al S27-PD $450 now $435
3.Hd45 $160 (no paypal fees)
4.RAW TI $200 Sold
5.McGizmo AMC Mule-EN Silve $165
6.A1 $235 (no paypal fees) Sold and shipped
7.CHROME A3 $350
8.THE MOUSE $630
9.MCGIZMO KL4 $150 (no paypal fees) Sold and shipped
10.A19 XR-E $170 Sold and shipped
11.A3 BLACK $150 (include shipping no paypal fees)
12.Chrome A19 head and A2 parts and 17500 bodies ask me the price
Thanks.
Zhang.
Let's see the pics:
[note: 17 over-sized images removed by moderator ]
A3 Good condition cr123a body and tail switch.
A1 Mint condition,Cr123a body and with tail swithch,has a beautiful Ti bezel on the head.
Aluminum S27 PD! The body and clip are fresh from modmags exotic coating GB. The body matches the head a lot better than the original slate coating it had and the Ti clip has been polished and coated with AlTiN. The piston has been milled to house one of B@rts 1.5x5mm trit vials(not included). The piston and head to body o-rings are new and freshly lubed giving this light buttery smooth piston and twisty action.
The Mouse and Chrome A3
The Mouse,300 lumens max output, 4 brightness levels, runs on 1xRCR123 LiON rechargeable at max for perhaps 45 minutes, min output of perhaps 2-3 lumens for 225 hours, full regulation for most of the runtime with approximate 95% average efficiency, several hours of low-brightness emergency light at tail end of runtime.
Can run on 1x123 primary cell with all brightness levels still available, but scaled proportionally less bright and longer-running... this would be a good option for power outage or other emergency use.
Acorn1.0 driver, basically a souped-up version of the driver developed for the Gotham.
Flushmounted tactical twisty switch heavily modified from the innards of a stock SureFire tactical twisty for smooth, light action.
Krytox and Nanolubricated threads fore and aft.
Flushmounted 'skyscraper-style' window with structural support from the backside, no visible retaining ring, reflectors moved as far forward as possible to eliminate bezel ring and head sidewall interference with the beam.
McR16ms reflectors, built to order by McGizmo for use with Seoul SSCP4 emitters, providing good throw from reflectors in this size category, while also delivering gradual intensity falloff from hotspot through outer sidespill for excellent field of view.
High density silicone foam in sidewalls to pad reflectors against lateral shock. High density silicone black matting with carbon fiber texture for aesthetics and circuit trace protection.
Dual-AR coated ultra-clear lens.
Shockmounted e-can in base of head for fit and shock resistance. All components in the head designed to be removable with no damage, glue residue, etc., should the owner ever wish to revert the head to more conventional single-reflector duty.
Chrome A3 Mint condition,change the led to Seoul Led,very beautiful!
HD45 WWOT, lux V with a deep 45 mm reflector. Color is pure white and has a barely visible donut hole, the smoothest beam . Has a couple of very slight wear if you were looking for them with a magnifying glass.
2 Stage, 700 mAh high and 100 low, twisty only. a very tough light for outdoors people.
McGizmo AMC Mule-EN Silve Mcgizmo's first wave ,NG400 driver and Cree Q2 Led
McGizmo KL4 Mod/E1e Body ,a KL4 head modded by Don with a 1W LED, bin R2H, and driven with what I believe is a BB500 converter. This mod is hosted on an E1e body/tailcap, with natural HA.
The beam is really nice...bright and white. The KL4 head has some minor signs of wear at the edges, but is still pretty "minty". I`d rate the KL4 at 97%+ mint, and the E1e at 99% mint.
Raw Ti
I have lots of beautiful and rare lights to sell.
A19 XR-E. HA finish. This light has a very nice beam and is very bright. Sold
Sceptre Dark Green Sold
*6x Cree Q5 Bin WC LED's
*1x Cree Red LED
*7x Mcr17XR Reflectors
*Custom Anodized Heatsink
*2-Stage resistored tailswitch
*UCL Lens
*Premium FiveMega battery holder for 6xR123 cells
Price List:
1.Sceptre $450 Sold
2.Al S27-PD $450 now $435
3.Hd45 $160 (no paypal fees)
4.RAW TI $200 Sold
5.McGizmo AMC Mule-EN Silve $165
6.A1 $235 (no paypal fees) Sold and shipped
7.CHROME A3 $350
8.THE MOUSE $630
9.MCGIZMO KL4 $150 (no paypal fees) Sold and shipped
10.A19 XR-E $170 Sold and shipped
11.A3 BLACK $150 (include shipping no paypal fees)
12.Chrome A19 head and A2 parts and 17500 bodies ask me the price
Thanks.
Zhang.
Let's see the pics:
[note: 17 over-sized images removed by moderator ]
A3 Good condition cr123a body and tail switch.
A1 Mint condition,Cr123a body and with tail swithch,has a beautiful Ti bezel on the head.
Aluminum S27 PD! The body and clip are fresh from modmags exotic coating GB. The body matches the head a lot better than the original slate coating it had and the Ti clip has been polished and coated with AlTiN. The piston has been milled to house one of B@rts 1.5x5mm trit vials(not included). The piston and head to body o-rings are new and freshly lubed giving this light buttery smooth piston and twisty action.
The Mouse and Chrome A3
The Mouse,300 lumens max output, 4 brightness levels, runs on 1xRCR123 LiON rechargeable at max for perhaps 45 minutes, min output of perhaps 2-3 lumens for 225 hours, full regulation for most of the runtime with approximate 95% average efficiency, several hours of low-brightness emergency light at tail end of runtime.
Can run on 1x123 primary cell with all brightness levels still available, but scaled proportionally less bright and longer-running... this would be a good option for power outage or other emergency use.
Acorn1.0 driver, basically a souped-up version of the driver developed for the Gotham.
Flushmounted tactical twisty switch heavily modified from the innards of a stock SureFire tactical twisty for smooth, light action.
Krytox and Nanolubricated threads fore and aft.
Flushmounted 'skyscraper-style' window with structural support from the backside, no visible retaining ring, reflectors moved as far forward as possible to eliminate bezel ring and head sidewall interference with the beam.
McR16ms reflectors, built to order by McGizmo for use with Seoul SSCP4 emitters, providing good throw from reflectors in this size category, while also delivering gradual intensity falloff from hotspot through outer sidespill for excellent field of view.
High density silicone foam in sidewalls to pad reflectors against lateral shock. High density silicone black matting with carbon fiber texture for aesthetics and circuit trace protection.
Dual-AR coated ultra-clear lens.
Shockmounted e-can in base of head for fit and shock resistance. All components in the head designed to be removable with no damage, glue residue, etc., should the owner ever wish to revert the head to more conventional single-reflector duty.
Chrome A3 Mint condition,change the led to Seoul Led,very beautiful!
HD45 WWOT, lux V with a deep 45 mm reflector. Color is pure white and has a barely visible donut hole, the smoothest beam . Has a couple of very slight wear if you were looking for them with a magnifying glass.
2 Stage, 700 mAh high and 100 low, twisty only. a very tough light for outdoors people.
McGizmo AMC Mule-EN Silve Mcgizmo's first wave ,NG400 driver and Cree Q2 Led
McGizmo KL4 Mod/E1e Body ,a KL4 head modded by Don with a 1W LED, bin R2H, and driven with what I believe is a BB500 converter. This mod is hosted on an E1e body/tailcap, with natural HA.
The beam is really nice...bright and white. The KL4 head has some minor signs of wear at the edges, but is still pretty "minty". I`d rate the KL4 at 97%+ mint, and the E1e at 99% mint.
Raw Ti
Last edited:
for Raw Ti and A19 Xre
