Fenix L2T v2.0 comparible to cr123

[bigbuckslayer]

I currently have a Fenix L2T v2.0 Was wondering what light or or lights that use cr123 would have about the same output looking for something with about the same features high and low setting with tailcap switch Thanks..........

 

[defloyd77]

The P2D body and tailcap with the L2T head and clickie module.

 

[mbw_151]

I carry what I call a P2Tv2 as my EDC. If you want the forward clickey you have to move the guts from the L2T tailcap to the P2D tailcap. I like it because it is very small, simple to use, has a reasonable low of about 15 lumens, and a good bright high. It's no E1B, but you can make 2 for the cost of an E1B. The P2Tv2 gets a little warm if you run it on high for a long time. The Q2 Cree heads get warm faster than the old Rebel 80 heads.

 

[DM51]

I'll move this to the LED Flashlights section. If you want to see some similar lights compared, you will find some good threads in the Reviews section.

 

[bigbuckslayer]

I guess I should have stated why the change. My other carry light has cr123 batteries. I always carry two lights when I`m in the woods and I wanted to get away from the AA so extra batteries could be used in both. Thanks

 

[bigbuckslayer]

I'll move this to the LED Flashlights section. If you want to see some similar lights compared, you will find some good threads in the Reviews section.

Thanks......

 

[defloyd77]

I guess I should have stated why the change. My other carry light has cr123 batteries. I always carry two lights when I`m in the woods and I wanted to get away from the AA so extra batteries could be used in both. Thanks

You can still do this with what mbw 151 and I suggested, you can get the get the P2D body and tailcap at fenixstore.com for 23.50 shipped (before cpf discount), unless you'd rather buy another light. What's your budget?

 

[bigbuckslayer]

I didn`t have a budget set I was just looking at options........