Fenix P3D Q2 WD
- Thread starter Nake
- Start date
Help Support Candle Power Flashlight Forum
mossyoak
Flashlight Enthusiast
the non Q2 version is apparently rated at 160 lumens. is the q2 ACTUALLY putting out 150 lumens?
jbosman1013
Enlightened
where did you get it
According to Chevrofreaks chart the P4 version is putting out in the 120s. This chart also shows the same for the P4 and shows 150 for the Q2.
http://img527.imageshack.us/img527/550/q2wdp4zl0.gif
Pro Light Japan
mossyoak
Flashlight Enthusiast
now that is awesome.
nanotech17
Flashlight Enthusiast
Woohoo got the same email too
Btw, do u know if it's gona be Nat or Black?
How much is it plus shipping ?
Woohoo got the same email too
Btw, do u know if it's gona be Nat or Black?
The pictures on his site showed natural so that's what I'm assuming, smooth reflector too.
I cost me $97 which included $15 shipping.
gunga
Flashaholic
I thought about getting one of those but decide to save up for HDS/Novatac...
Looks great!
Looks great!
nanotech17
Flashlight Enthusiast
Hi all!
First post here...
:
First post here...
Got a similar message me too
:Yesterday I received, from fenix-store, the L0D-CE, P1D-CE, P2D-CE, all Q2/natural. I'm very happy with them and now the P3D-CE Q2 is going to join the family...
Kilovolt
Flashlight Enthusiast
Hi Marven, I see this is your first post, welcome to CPF.:kiss:
Do you know whether the reflector of your unit is smooth or stippled?
:candle:
Do you know whether the reflector of your unit is smooth or stippled?
:candle:
easilyled
Flashaholic
So how does one order through the JPL site (http://www.pro-light.jp/)
without having to understand Japanese?
without having to understand Japanese?
Hi Kilo! :wave:
From this review:
http://illuminum.cocolog-nifty.com/led_light/2007/06/fenix_p3d_ce_q2.html
I suppose the reflector is smooth.
On the same review there is a comparison between the P3D vanilla e the Q2 version.
The P3D-CE outputs 126 lumens while the Q2 158.
The 126 lumens of the P3D-CE, more or less, match the 121 lumens measured by [FONT=Verdana, Arial, Helvetica, sans-serif]Doug at flashlightreviews.
[/FONT]
From this review:
http://illuminum.cocolog-nifty.com/led_light/2007/06/fenix_p3d_ce_q2.html
I suppose the reflector is smooth.
On the same review there is a comparison between the P3D vanilla e the Q2 version.
The P3D-CE outputs 126 lumens while the Q2 158.
The 126 lumens of the P3D-CE, more or less, match the 121 lumens measured by [FONT=Verdana, Arial, Helvetica, sans-serif]Doug at flashlightreviews.
[/FONT]
easilyled
Flashaholic
Thanks marven
LA OZ
Enlightened
With that price, it is awfully similar to the Novatac 85. I will wait for the Novatac delivery and review from you guys before deciding.
wintermute
Enlightened
- Joined
- Nov 16, 2004
- Messages
- 681
I was going to post this page...since I read it about 1 week ago, but you beat me to it. Here's a translated version (copy link location and then paste into new browser window, or it won't translate)
http://64.233.179.104/translate_c?h...=s&rls=org.mozilla:en-US:official&hs=1Qm&sa=X
But yes, they tested the Q2 P3D at 158 lumens (out the front) compared to P4 P3D at 126 lumens (out the front). Site is really nice in many ways, everyone should check the translated version out. Not sure how Google got the Japanese -> English translation to work so well...but it's very good IMO.
That's exactly where one of my Q4s is going, another is going into the LxD head. :twothumbs
Last edited:
