Sold/Expired FS: Let's go military (MIL SPEC HA III MAG host) *** 3rd batch ready ***

[Britelumens]

Hi Guys,

Finally it's here for the HA III fans.

Here is a small run of Mag host in true MIL-SPEC HA III (Olive) that will be available in limited quantity. The host are strip bare to aluminum before they goes to the HA III stage. Quality is ensure! They have extremely hard and wear resistance on their treated surface. If you happen to get one and need rework on a lathe. You will know what I mean

These host comes with standard Mag stock parts. And all necessary electrical contact has been rework just like what you will see on the stock Mag.


SUREFIRE M6 for color comparison (3rd batch) , NOT FOR SALE

*** 3rd batch custom mag host ( 4th BATCH COMING SOON.... )***​

Here are the pricing for each:




Available limited host for purchase below:



1) MAG HA III 1D host - $85
( Cut / rethread from 2D )

0 available





2) MAG HA III 1D host - $100
( Finned Mag head / Cut / rethread )
The above is compatible with 1 AW /Kai D Li ion battery



#1 yotom (PAID and SHIPPED)
#2 Metatron (PAID and SHIPPED)
#3 sunshine57 (PAID and SHIPPED)


2a) MAG HA III 1D host - $120
( Finned & Flute Mag head / Cut / rethread )
The above is compatible with 1 AW /Kai D Li ion battery



#1 (grooved on handle) nailbender (PAID and SHIPPED)
#2 Navistar (PAID and SHIPPED)





3) MAG HA III 1.5D host - $105
( Finned head / Cut / rethread / Tri-bored)
The above is compatible with 1 unit of FM 3 x 17670 battery holder.


# 0 available





4) MAG HA III 1.5D host - $125
( Finned & Flute head / Cut / rethread / Tri-bored)
The above is compatible with 1 unit of FM 3 x 17670 battery holder.


#1 (grooved on handle) nailbender (PAID and SHIPPED)
#2 tx101 (PAID and SHIPPED)
#3 SUBjohan (PAID and SHIPPED)
#4 Mettee (PAID and SHIPPED)






5) MAG HA III 2C standard - $65
( Stock size )


0 available





6) MAG HA III 1C host - $85
( Cut / rethread from 2C )

#1 nailbender (PAID and SHIPPED)
#2 SOLD
#3 SOLD





7) MAG HA III 3D standard - $85
( Stock size / Finned mag head )


#SOLD
#SOLD











Shipping is $18 each. Additional host add $8.

Registered mail please add $2.00. I'll be responsible for lost or undelivered mail should you decided to choose this option.
I'll not be responsible for lost mail shipping via regular airmail. Please allow 9 - 11 working days for it to arrive.

PAYMENT TO: info (AT) britelumens dot com









With regards,
Jo @ Britelumens

 

[9x23]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Hello Jo,

Very nice work! A couple of questions......

1. Is the 1D host bored to accept a FM 4AA battery holder or is that part of the future run?

2. Does the 1.5D host accept the FM 3x17670 designed for the Surefire M6? Or, was there another version of the FM 3x17670 battery holder that works with this?

Thanks!

9x23

 

[Britelumens]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Hello Jo,

Very nice work! A couple of questions......

1. Is the 1D host bored to accept a FM 4AA battery holder or is that part of the future run?

2. Does the 1.5D host accept the FM 3x17670 designed for the Surefire M6? Or, was there another version of the FM 3x17670 battery holder that works with this?

Thanks!

9x23

Hi 9x23,


The 1D above are standard Mag host cut / rethread from a 2D.
And there is no internal enlargement. But if your FM 4AA holder has the same diameter as the FM 6AA holder for 2D. It will fit.


Yes, the tri-bored (later run) is compatible with FM 3 x 17670 battery holder. The one with the charging jack function (with a protrude negative section) as I understand there are a few version around. Some with cut-off and some shorter negative side. They are easily solve with shortening / using stock length spring.


With regards,
Jo @ Britelumens


p/s: will make a couple of the tri-bored to show.

 

[Mettee]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

I would like one tri bored 1.5 D with no finning or groving if possible.

 

[brucec]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Is there any way to get a complete P7 light per the following thread?

http://www.candlepowerforums.com/vb/showthread.php?t=211961

 

[Britelumens]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

I would like one tri bored 1.5 D with no finning or groving if possible.

Hi Mettee,

Yes, that is possible.

Is there any way to get a complete P7 light per the following thread?

http://www.candlepowerforums.com/vb/showthread.php?t=211961

Hi brucec,


Sure, I will build a unit for you and if you need the green glow?


With regards,
Jo @ Britleumens

 

[Mettee]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Jo let me know when you finish one for me.

 

[Patriot]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Very nice finish and color....

hmm....so tempting :thinking:

 

[Luminous]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Would you make a 3C+ (cut down 4C) to fit 3 x C size Li-Ion AW cells? Possibly with flutted or finned head? How much would it be?

 

[JasonH]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

How long are the bodys of the 1D and 1.5D. No head or tail cap

 

[3rdrock]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

I'm in for a 1 D (AW C) (thats 5. 9/16) inches long with a finned head.






with shipping and insurance

 

[Lumencraft (Matt)]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Nice BL, Those look great. Some what origonal too, at least I have never seen an olive m*g anyway:thumbsup:

 

[Britelumens]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

P7 in HA III host :devil:

With regards,
Jo @ Britelumens

 

[Team Member]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

P7 in HA III host :devil:

With regards,
Jo @ Britelumens

Now THAT is exactly what I like to see!!!!!! :twothumbs

Is it possible to make one just like it, that fits Fivemegas latest 3*17650 holder?

Send me PM with a price on a complete light incl registerd shipping....please../Martin



..I´m still drooling...

 

[Saranic]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

This looks cool...

 

[toyopet]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Thanks Jo!

Top notch work!

 

[jolivanra]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Ohh! I wish these are still available in maybe two weeks :devil:

 

[orcinus]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Signing up for 1.5D finned, tri-bored, as discussed via PM.
Payment pending.

 

[Mettee]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

sweet. will be in touch with payment. I will be adding two D P7 heatsinks to the order.

And I am curious if you can FIN AND FLUTE I think that will look really good?

Drew

 

[toyopet]

Re: SIGN UP: Let's go military (MIL SPEC HA III MAG host)

Left: MIL SPEC HA-III Finned P7 by Brightlumens
Middle: Fenix Olive P3D
Right: JetBeam MkIIx