TranquillityBase
Flashlight Enthusiast
- Joined
- Jun 12, 2005
- Messages
- 3,742
SPF: My last Maxlite SPF
One Maxlite, from Lighthound...This was a 'seconds' (speckles in the HA, head only), different style switch housing too.
$175 delivered (soft case included) SOLD
------------------------------------------------------------------------------------------------------------------
Sold
One Aleph 3 HA black, Icarus built LE with a Seoul USVOI emitter, and a Nexgen driver.
CR123 cell body, with a 'standard flat top' tailcap.
Not sure of the drive level, DMM reads about 650mA from the tailcap side.
The two level switch has the yellow screw (don't know the resistor value...Donn Help Please) It is a very low, low setting and somewhat flickery (with a primary cell)...I never had this problem with Lux LE's and two level McE2S, but most of the Seoul LE's do this flicker thing on low.
Here's the rub with the McE2S low setting flicker thing...With RCR123 it's very stable, but the Nexgen is for primary cell only, so I've been told:shrug:
$225 delivered
One Maxlite, from Lighthound...This was a 'seconds' (speckles in the HA, head only), different style switch housing too.
$175 delivered (soft case included) SOLD
------------------------------------------------------------------------------------------------------------------
Sold
One Aleph 3 HA black, Icarus built LE with a Seoul USVOI emitter, and a Nexgen driver.
CR123 cell body, with a 'standard flat top' tailcap.
Not sure of the drive level, DMM reads about 650mA from the tailcap side.
The two level switch has the yellow screw (don't know the resistor value...Donn Help Please
) It is a very low, low setting and somewhat flickery (with a primary cell)...I never had this problem with Lux LE's and two level McE2S, but most of the Seoul LE's do this flicker thing on low.Here's the rub with the McE2S low setting flicker thing...With RCR123 it's very stable, but the Nexgen is for primary cell only, so I've been told:shrug:
$225 delivered
Please feel free to ask questions on this thread, or via email
USA only please
Last edited:
I'll paypal at lunch.
I'll be at my mailbox if anyone needs me
I guess I need a 2X18650 body too. Thanks to you and Kiessling the Aleph/e-series lego kit is almost complete.
