(CLOSED) G4 Bi-Pin PR Sockets By FiveMega (6th Run)
[size=+5]
[size=+3]
[size=+1]Hex Wrench Included[/size]
[size=+1]LEFT: WA1185[/size] - - - [size=+1]RIGHT: Philips 5761[/size]
[size=+4]Philips 5761[/size]
[size=+5]
Here I have more of these hi-temp PR base to bi-pin sockets with improved design and high quality ready to ship.
No expensive gold plating process to keep the price low.
Very easy to use. No tool needed, no cutting, grinding and no skills. Will fit in stock M*g C and D switch without modification.
Simply push in your G4 bi-pin bulb, Gently tighten set screw and install in your M*g. Will work with all G4 WA bulbs such as: 1111, 1160, 1166, 1185, FM1909, Philips 5761, Osram 64275 and.... Philips 5761.
PR base is mill machined from solid brass, for durability and best electrical connection, then electricaly seperated with hi temp material. No corrosive metal to oxidize, no glue to smoke, no soldering to melt down.
[size=+1]Please G E N T L Y tighten set screw to hold bulb from falling off.[/size]
Purpose of set screw is to hold weight of bulb only. Overtightening will cause pinch bulb pin, stock there, strip threads and void warranty. So do NOT show us power of your muscle.
I have tested in M*g 1185 for 50 minutes continuous (overdriven to 11.1 volt) and 2-1/2D M*g for 70 minutes continuous (overdriven to 7.4 volt)
This will work with all FM3" cammed heads and all FM Dual Function and Bi-Focal cammed reflectors.
I do not guarantee to work with any other brand aftermarket reflectors.
Price:
Brass $18 for first socket and $16 for each additional one. (NOT AVAILABLE) (One Hex Wrench Included)
Bi pin Philips 5761 $6 each (NOT AVAILABLE)
Potted WA1185 $10 each (NOT AVAILABLE)
Bi pin WA1274 $6 each (NOT AVAILABLE)
Borofloat (Pyrex) lens $7.50 each (NOT AVAILABLE)
Mineral glass lens $3 each (NOT AVAILABLE)
Extra Hex Wrench $1 each (NOT AVAILABLE)
Shipping $4 to States (any quantity)
Shipping $5 internationaly (any quantity)
Insurance $2.60 for each $100 value in States
Insurance $6.00 for each $100 value internationally
I am not responsible for loss or damage once I ship your package.
Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
Please DO NOT pay for any item not listed here.
For documentation purpose, it is [size=+1]Necessary[/size] to post your request here and detail of your order in Paypal note.
Paypal: [size=+1]DO NOT PAY[/size]
Please contact me for other type of payment or combine shipping.
For documentation purpose, it is [size=+1]Necessary[/size] to post your request here and detail of your order in Paypal note.
Example: Mr. Mohan
for 2 brass sockets
All comments welcome.
-------------------------
[size=+1]Please see:
Bi-Focal Reflectors
G5.3 sockets.
M*gCharger slugs.
M*g tri bundle battery holders and M*g quad bundle battery holders.[/size]
[size=+5]
[size=+5]
(C L O S E D)
[/size][size=+3]
6th Run
G4 Sockets
[/size]G4 Sockets
[size=+1]LEFT: WA1185[/size] - - - [size=+1]RIGHT: Philips 5761[/size]
[size=+5]
MADE IN USA
[/size]Here I have more of these hi-temp PR base to bi-pin sockets with improved design and high quality ready to ship.
No expensive gold plating process to keep the price low.
Very easy to use. No tool needed, no cutting, grinding and no skills. Will fit in stock M*g C and D switch without modification.
Simply push in your G4 bi-pin bulb, Gently tighten set screw and install in your M*g. Will work with all G4 WA bulbs such as: 1111, 1160, 1166, 1185, FM1909, Philips 5761, Osram 64275 and.... Philips 5761.
PR base is mill machined from solid brass, for durability and best electrical connection, then electricaly seperated with hi temp material. No corrosive metal to oxidize, no glue to smoke, no soldering to melt down.
[size=+1]Please G E N T L Y tighten set screw to hold bulb from falling off.[/size]
Purpose of set screw is to hold weight of bulb only. Overtightening will cause pinch bulb pin, stock there, strip threads and void warranty. So do NOT show us power of your muscle.
I have tested in M*g 1185 for 50 minutes continuous (overdriven to 11.1 volt) and 2-1/2D M*g for 70 minutes continuous (overdriven to 7.4 volt)
This will work with all FM3" cammed heads and all FM Dual Function and Bi-Focal cammed reflectors.
I do not guarantee to work with any other brand aftermarket reflectors.
Price:
Brass $18 for first socket and $16 for each additional one. (NOT AVAILABLE) (One Hex Wrench Included)
Bi pin Philips 5761 $6 each (NOT AVAILABLE)
Potted WA1185 $10 each (NOT AVAILABLE)
Bi pin WA1274 $6 each (NOT AVAILABLE)
Borofloat (Pyrex) lens $7.50 each (NOT AVAILABLE)
Mineral glass lens $3 each (NOT AVAILABLE)
Extra Hex Wrench $1 each (NOT AVAILABLE)
Shipping $4 to States (any quantity)
Shipping $5 internationaly (any quantity)
Insurance $2.60 for each $100 value in States
Insurance $6.00 for each $100 value internationally
I am not responsible for loss or damage once I ship your package.
Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
Please DO NOT pay for any item not listed here.
For documentation purpose, it is [size=+1]Necessary[/size] to post your request here and detail of your order in Paypal note.
Paypal: [size=+1]DO NOT PAY[/size]
Please contact me for other type of payment or combine shipping.
For documentation purpose, it is [size=+1]Necessary[/size] to post your request here and detail of your order in Paypal note.
Example: Mr. Mohan
for 2 brass socketsAll comments welcome.
-------------------------
[size=+1]Please see:
Bi-Focal Reflectors
G5.3 sockets.
M*gCharger slugs.
M*g tri bundle battery holders and M*g quad bundle battery holders.[/size]
[size=+5]
(C L O S E D)
[/size]
Last edited:
