WarriorOfLight
Flashlight Enthusiast
The handling is quite easy. I use NOA61 to fill the slot.
Place the trit, align the trit in the slot with a needle. I used a tooth stick to put the NOA in the trit slot. I put the tooth stick into the NOA61. Than moved to the trit slot. On the tooth stick should be a drop of NOA61.
This will ne done a few times until the trit slot with the trit is colpletely filled. Also put a little bit more NOA in the slot, it shrinks a little bit during cure. To cure the NOA, use a UV light or Sunlight.
After 10-15 minutes the NOA is cured in summer sunlight. With a good UV light it should go faster.
Do this for wach trit slot until all are done. If you want wait an hour or a little bit more between processing the next slot, than the NOA is completely cured and hard like a rock.
It it dies bot work at the first time and NOA is not only in the trit slot, remove the liqid NOA with a piece of toilet paper clean everything with ethanol or something similar and statt again.
It is no problem to do this NOA handling in a normal room. The only thing is the NOA bottle should not be placed in the sun. You could put a small amount of NOA on a piece of printer paper. A few big drops that were moved from the bottle to the paper will laste for one trit slot.
If there are additional questions feel free to ask...
Place the trit, align the trit in the slot with a needle. I used a tooth stick to put the NOA in the trit slot. I put the tooth stick into the NOA61. Than moved to the trit slot. On the tooth stick should be a drop of NOA61.
This will ne done a few times until the trit slot with the trit is colpletely filled. Also put a little bit more NOA in the slot, it shrinks a little bit during cure. To cure the NOA, use a UV light or Sunlight.
After 10-15 minutes the NOA is cured in summer sunlight. With a good UV light it should go faster.
Do this for wach trit slot until all are done. If you want wait an hour or a little bit more between processing the next slot, than the NOA is completely cured and hard like a rock.
It it dies bot work at the first time and NOA is not only in the trit slot, remove the liqid NOA with a piece of toilet paper clean everything with ethanol or something similar and statt again.
It is no problem to do this NOA handling in a normal room. The only thing is the NOA bottle should not be placed in the sun. You could put a small amount of NOA on a piece of printer paper. A few big drops that were moved from the bottle to the paper will laste for one trit slot.
If there are additional questions feel free to ask...