How come no parallel 2AA body designs?...

LEDBE
M

mega_lumens

Enlightened
Joined
Jul 31, 2005
Messages
314
2AA lights tend to be longish, so why won't manufacturers parallel stack the AA batteries to shorten the length of body? Pistol lights that run on CR123s, are parallel stacked to make them small length wise, so can this work for 2AA lights?
 
Price might be a problem. IIRC it is more expensive to machen a double barrel body. Molding should be fine though but then there might be strength or heatsinking problems.
 
It's more costly to make metal lights like you want. However, there are plastic flashlights that that are made with sets of two batteries side by side. Princeton Tec makes a lot of them. PT Attitude (l.e.d.), Blast (bulb), Tec 20 (2AA, bulb), Tec 40 (2x2 AA, bulb), Rage, PT Amp lights (rebel and Nichia GS l.e.d.s).
 
I've always liked the 2AA side-by-side form factor. My first "favorite" light was a black Rayovac Workhorse with a 2AA side-by-side configuration. Wow that was a horrible flashlight. :)

I suspect there are two problems with it, as previously noted machining costs are almost certainly higher. Not such a big deal if you injection mold though. The real problem that I see is you created an environment for a rectangular reflector, and there's just only so much you can do within the laws of physics to make that beam pattern not suck and it isn't enough...

Check out Eternalights though, they are all flood, and they use a 3xAA side-by-side-by-side battery to achieve the same form factor. They were my 2nd great love in flashlights!
 
UK or Underwater Kinetics make most of their lights in a side by side molded configuration - I have a couple and have been quite happy with them - Brightguy.com has them as do many local dive shops - they are very popular with divers and emergency workers

mb
 
I'm still waiting for the day somebody comes out with a short 4xAA/1D round tube pocket rocket. But I fear that day will never come :(
 
A 4AA or 6AA light in a 2x2 or 2x3 side-by-side configuration is just about my favorite form factor. Short, fits neatly in the hand, perfect for NiMH rechargeable batteries.

I really wish there were more lights available with that design. I despair at all the 2D and 3AAA lights out there. Gimme what I want!
 
Toaster said:
I'm still waiting for the day somebody comes out with a short 4xAA/1D round tube pocket rocket. But I fear that day will never come :(
Click to expand...

DIY (or have Mac do it for you: http://www.candlepowerforums.com/vb/forumdisplay.php?f=96)

MacOwns.jpg
 
Mr Happy said:
A 4AA or 6AA light in a 2x2 or 2x3 side-by-side configuration is just about my favorite form factor. Short, fits neatly in the hand, perfect for NiMH rechargeable batteries.

I really wish there were more lights available with that design. I despair at all the 2D and 3AAA lights out there. Gimme what I want!
Click to expand...

Make one...... and then make a few more and we will buy them;)
 
there are some cheap swivel 2AA lights that very in quality from horrible to average using bipin bulbs but most 2AA side/side lights are specialty type diving or swivel lights. You won't see any non custom made 2AA side/side lights made from aluminum or metal out there as it requires a lot more machining and/or parts not just making a head, cap, and treading tube. Most of that can be done on a lathe while a block of metal and probably a computerized router would be required for a side/side light.
making round lights are easy out of metal... non round.... tough.
 
mwaldron said:
I've always liked the 2AA side-by-side form factor. My first "favorite" light was a black Rayovac Workhorse with a 2AA side-by-side configuration. Wow that was a horrible flashlight. :)
Click to expand...
I had a similar one as in the Duracell Durabeam when it came out as I got it from my Grandma the day we were picking up a new miniature poodle (lived some 13 years) when I was young. I had fun with it and made use of the flat shape and beam by strapping it to the top of my Radio Shack RC Truck and Turbo Beattle car and running them around the basement with the lights off. Sadly it it broke or disappeared some years later. I remember it was a bit of work in replacing the 2xAA batteries as it sometimes took a few tries.

I also had a Rayovac Workhorse (though 3D version) that I got for my birthday in grade 3 from a friend and found the lens was not very durable (cracked), however the PR bulb was very durable in comparison in taking physical abuse.
 
I used to have a couple of those 2AA Durabeams, too, in my post MiniMag pre CPF years. Liked them better than the old Mag. They're around here somewhere.

Geoff
 
I've posted this question in a few places around here and have gotten almost no responses. A 2xAA version of a Spy007 would be awesome! Sabrewolf is developing a Chimera which is 2x18650, but maybe we can convince him to do 2xAA too.
 
How funny is this...I got an ROV 2AA workhorse for Christmas. Ugly dim beam, but just plain fun form factor. Now I wonder how I'm going to mod this thing? :thinking:

-JB
 
brucec said:
I've posted this question in a few places around here and have gotten almost no responses. A 2xAA version of a Spy007 would be awesome! Sabrewolf is developing a Chimera which is 2x18650, but maybe we can convince him to do 2xAA too.
Click to expand...
I'd love this format with it's shorter length and would really love to see a AAA version too! :huh:
 
My most comfortable-in-the-hand feeling light is the old Streamlight Pro Poly Lux 4AA .
I realize this is about 2AA but ....
I like the oval shape very much.
 
You must log in or register to reply here.

Similar threads

PaladinNO
Sofirn no longer ships to Norway?
2
Replies
20
Views
741
PaladinNO
PaladinNO
T
MX212/U Modify or no?
Replies
1
Views
367
bykfixer
bykfixer
Y
How long for strobe mode on fenix torch
Replies
2
Views
227
Yardpower99
Y
Marquis07
Theory - Why not doubled body for dual switch?
Replies
9
Views
753
letschat7
L
B
E1, Maglite 2AA w/ xenon, UKE 2L, UKE 2AAA
2
Replies
20
Views
1K
alpg88
alpg88

Latest posts

Top