Sold/Expired L1D CR123 bodies.

[kooter]

I have had a couple of people PM me about 123 bodies for the L1D. I dont know anything about this light, but if there is enough interest ill pick one up and make a body to suit. Anyone?????
Just looked at the light. It runs a single AA at 1.5v, the 123 puts out 3v.

 

[Wolfen]

The L1D CE and L2D CE use the same head. The L2D CE takes two AA for 3 Volts.

http://www.flashlightreviews.com/reviews/fenix_l1dce-l2dce.htm

 

[Senses]

I'm in for either a RCR2 or RCR123, depends on the size

 

[Blindasabat]

I've been waiting for a black anodized AL one of these to get an L1D...

 

[Nake]

I'll take one for a protected RCR123.

 

[wasBlinded]

I'd like one for CR2 cells, which I'm up to my eyeballs in.

 

[l1s125]

I would be very interested in a 123 body... as long as it retains the ability to switch between general and turbo modes

 

[r0b0r]

I would love a 123 body

 

[Delta]

123 body for me

 

[LowTEC]

I will probably in for one, but I will have to see how my P1D/kooter body turns out first

 

[Long John]

I will probably in for one, but I will have to see how my P1D/kooter body turns out first

I guess, when you will receive your P1D-body, you will not feel a need for another one
It is such an improvement, you'll be very happy with it.

Best regards

____
Tom

 

[kooter]

I have ordered a L1D from lighthound. Should be here in a week. I will start by making a couple to take CR123s then go from there. RCRs & CR2s will be made if wanted. You guys do know its gonna be bare ally, no anodising.

Hi Tom. :wave:

 

[Long John]

I have ordered a L1D from lighthound. Should be here in a week. I will start by making a couple to take CR123s then go from there. RCRs & CR2s will be made if wanted. You guys do know its gonna be bare ally, no anodising.

Hi Tom. :wave:

Hello Paul

Great compliment to you, how you respect for the requests of your customers ...:twothumbs

Very best regards

______
Tom:wave:

 

[Wolfen]

Sounds great!! I'm in for one L1D / cr123a body threaded for Surefire E-series tailcap.

 

[hburner]

I'm listening, hb/

 

[kooter]

It can be threaded for which ever tailcap you want. You will have to specify fenix or SF.

 

[r0b0r]

It can be threaded for which ever tailcap you want. You will have to specify fenix or SF.

Ooh.... interesting...

A mongrel Fenix L1D with a black head, bare Al body and nat SF tailcap!

 

[kooter]

Hope to get the L1D midweek. The bodies are going to be $35. Who wants the first one and to what specs? Tailcap, finish, and cell.

 

[Wolfen]

I want the first! Surefire E series tail cap / smooth finish / CR123a.

I'll put a Surefire clickie on mine.

 

[kooter]

Wolfen, the first one is yours mate.

Ally or SS? Sand blasted??