Logan #0??????

[RAGE CAGE]

ok- looks like this may now be a special order thru RMSK then Peak will drop ship it....looks promising. Another post from Curt mentioned the #2 Logan ran for 45 hrs on a primary CR123....so the #0 may have a potential run time of 90+ hours. Sounds interesting.:thumbsup:

 

[carrot]

Going by the numbering system I would assume the #0 would emit no light and run forever!

Did you see that Curt was testing out a custom #0.5 for someone?

 

[Curt R]

Just finished the testing using the Cree XP-G with various operating conditions. I will compile the info
and get it to RMSK to post in the info section on his site early next week, as I am moving to a different
house this weekend and don't have the spare time with packing and such.

This is an incomplete sample:

The new #0 with a 1.5 volt battery has a 30 mA battery drain, 12 mA LED drive and with a 3.0 volt battery it
is 18 mA drain, 13 mA drive and with the 3.7 volt Li-Ion 24 mA drain at 23 mA drive.

10 mA drive equals about 3.5 Lumens and 20 mA drive is 7.6 Lumens.

With a 10180 battery that would give about 3.5 hours of run time at 7 Lumens and 24 foot candles.

Curt

 

[Beacon of Light]

Curt is it possible to do a 5 mA drive or better yet a 1 mA drive? What would those be called a #-1 & #-2 :D

 

[GarageBoy]

I didn't know XPGs lit up under such low currents. Why does everyone rely on PWM, then?

 

[MWClint]

The new #0 with a 1.5 volt battery has a 30 mA battery drain, 12 mA LED drive and with a 3.0 volt battery it
is 18 mA drain, 13 mA drive and with the 3.7 volt Li-Ion 24 mA drain at 23 mA drive.

Considering the circuit handles 1.5v batteries...the logan #0 would be a great CR123A battery vampire!!!

 

[Beacon of Light]

Considering the circuit handles 1.5v batteries...the logan #0 would be a great CR123A battery vampire!!!

That's why I'll probably want one after I get my 2 Eiger #0s. Once I do the runtime test on the Eigers I'll prob order a #0 Logan!