Looking for a driver...

Buck91

Flashlight Enthusiast
Joined
Feb 26, 2007
Messages
1,714
Perhaps somebody here can help... I'll looking for an economical driver for my Ultrafire C1. Necessary specs are as follows:
17mm diameter
high mode approx. 1000mA
low mode notably under 350mA (shooting for 10-15lm with a Cree Q3)
Strobe (preferably flash)

Any thoughts? Nothing on DX seems to do the trick, all the 17mm boards are either sold out or 20 mode :shrug:
 

fandango

Newly Enlightened
Joined
Jan 29, 2009
Messages
16
Location
manchester uk
hi17mm 1000mAh 5-Mode with Mode-Memory LEDDriver Circuit Board for Cree XR-E Emitters (0.9~4.5V Input)
Item Number 15880, i have ordered something a driver off dx just like what you are after,
 

Buck91

Flashlight Enthusiast
Joined
Feb 26, 2007
Messages
1,714
Almost perfect (figure it'll be impossible to find a board without mid-level or SOS), but I was hoping to be able to use either 1 or two Li-ion's.
 

jasonsmaglites

Enlightened
Joined
Feb 15, 2007
Messages
980
is that a good driver for a 4d mag sscp4 or sscp7 with a stock switch. i like the 2 mode hi/low no strobe or sos. can it drive a p7 or is that too much for it?
 
Top