Sold/Expired Looking for Balrog bodies!

[labrat]

I am looking for Balrog bodies!
Anyone out there with some spares?
Bare or anodized, preferrably 1x123, but also 2x123 of interest!

 

[labrat]

Bump for the weekend.
Still looking for these.

 

[MarNav1]

Alright labrat, what are you up to now?

 

[labrat]

Just looking for these bodies from Balrog, very nice and no clip!
I am mostly looking for a 1x123 body in gray anodized version, but a 2x123, bare or gray, is also interesting!

 

[labrat]

Noone have one of these laying around?
Still looking!

 

[MarNav1]

Hows the one I sent you Working?

 

[labrat]

Hows the one I sent you Working?

It works great with clicky's, but not with two stage tail-caps.
It looks great too!
But I see there are many others who have experienced problems with Balrog bodies and two-stage tail-caps.
I have been checking what could be the problem, and I believe it is the angle of the ledge inside the tube, at which the edge of the contact-board is to connect to the tube when the tail-cap is screwed down.
So after the Christmas holliday, and I have come back and can start making way in between all my "hobby mess", I was thinking of assembling my mini-lathe, and try making the angle of the ledge a bit bigger, so the ledge will have a bigger, "softer" slope for the contact-board to connect with.
And I hope I can have one more of these also, so I can do both of them at the same time!
But first I am going to Asia over the weekend, and stay away from the cold and winter here in Norway till the worst have passed!
Bringing just enough lights to make me see inside Angkor Wat, and look for Angelina Jolie!